[Gasification] Charcoal Reduction Mill

[Toby Seiler]

Jeff, Mark, 
 
Here is another concept... but without a mill.  
 
Make the downdraft bottom section so as material flows in, it goes into a hydraulic driven compactor (ram or rotary) that forces it down an extrusion tube, where it cools and uses the heat to help bond the remaining lignin. Use the latent heat, just add pressure (of course in an oxygen free set-up).   
 
Toby
Seilertechco
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20110830/829af72b/attachment.html>