[Gasification] DIY Fischer Tropsch catalysts

Dan Lacy d0xunt at gmail.com
Mon Feb 14 13:33:53 CST 2011


Mark,

The best numbers that I have seen with an efficient conversion rate are in the 80gal/ton range. I would guess for that to be the upper end. I don't have links in front of me but I shall look when I return home.

Best regards,

Dan Lacy

Sent from my iPhone

On Feb 13, 2011, at 1:25 PM, "Mark Breeze" <mark at breezesolar.co.uk> wrote:

> Hi Jay
>         I read your posting on (ft) reactor very impressive ,are there any figures out there  that tell you how much biomass(ie dry woodchip) you need to make enough syngas to make 1lt synthetic fuel. I appreciate these can only ballpark figures but its nice to have a rough idea of the economics of a situation you are tring to get into.
>  
> Much admiration
>  
> Mark
> _______________________________________________
> Gasification mailing list
> 
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
> 
> for more Gasifiers,  News and Information see our web site:
> http://gasifiers.bioenergylists.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20110214/450598d1/attachment.html>


More information about the Gasification mailing list