[Gasification] Gasification Digest, Vol 12, Issue 20

awesales tbone188 at gmail.com
Tue Sep 6 07:29:47 CDT 2011


Hi Jeff
I would like to ask you if what you are referring to "char" is actual
charcoal or is it actually coal. I am building a wood gasifier with an eye
on a coal gasifier. I think the only way to do it is "fireballs" and have
seen some reference to this on these forums. I am not sure if their
reference to there charcoal is actually coal. Could you enlighten me?
Thanks
Ted

On Mon, Aug 29, 2011 at 12:00 PM, <
gasification-request at lists.bioenergylists.org> wrote:

> Send Gasification mailing list submissions to
>        gasification at lists.bioenergylists.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> or, via email, send a message with subject or body 'help' to
>        gasification-request at lists.bioenergylists.org
>
> You can reach the person managing the list at
>        gasification-owner at lists.bioenergylists.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gasification digest..."
>
>
> Today's Topics:
>
>   1. Re: VIRUS warning, was______Re:  (no subject) (Tom Miles)
>   2. Re: Charcoal Reduction Mill (Jeff Davis)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 28 Aug 2011 13:51:07 -0700
> From: "Tom Miles" <tmiles at trmiles.com>
> To: "'Discussion of biomass pyrolysis and gasification'"
>        <gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] VIRUS warning, was______Re:  (no subject)
> Message-ID: <001e01cc65c4$362806d0$a2781470$@com>
> Content-Type: text/plain; charset="us-ascii"
>
> Bruno
>
>
>
> Thanks for the alert. Someone clearly hijacked Jai's email address so that
> we are now moderating posts from it.  We've caught a couple of these before
> they have gone to the list.
>
>
>
> Tom
>
>
>
> From: gasification-bounces at lists.bioenergylists.org
> [mailto:gasification-bounces at lists.bioenergylists.org] On Behalf Of Bruno
> M.
> Sent: Sunday, August 28, 2011 8:08 AM
> To: Discussion of biomass pyrolysis and gasification
> Subject: [Gasification] VIRUS warning, was______Re: (no subject)
>
>
>
> Dear members,
>
> Do not click the link it leads to a pseudo Viagra promo site, and possible
> virus infected !
>
> Jai check or better renew all your passwords, and run a good malware &
> virus
> scanner on your PC,
> I'm sure you didn't posted that link yourself, but your system has been
> hacked or virus infested.
>
> Mod, maybe you better put his account on moderated until matters are
> solved.
>
> Grts
> Bruno M.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Op 28-8-2011 9:16, jai balwanshi schreef:
>
>
> http://saisonsf.com/old_saisonsf.com/
> <
> http://saisonsf.com/old_saisonsf.com/beta/wp-content/plugins/fresh-page/thi
> rdparty/phpthumb/cache/2/2a/2a8/2a8c/kvkknn.htm>
>
>
>
>
>
> <
> http://saisonsf.com/old_saisonsf.com/beta/wp-content/plugins/fresh-page/thi
> rdparty/phpthumb/cache/2/2a/2a8/2a8c/kvkknn.htm>
>
> beta/wp-content/plugins/fresh-page/thirdparty/phpthumb/cache/2/2a/2a8/2a8c/k
> vkknn.htm
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20110828/c5be1b61/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Sun, 28 Aug 2011 22:50:28 -0400
> From: Jeff Davis <jeff0124 at velocity.net>
> To: Discussion of biomass pyrolysis and gasification
>        <gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] Charcoal Reduction Mill
> Message-ID: <1314586228.3150.16.camel at jeff-laptop>
> Content-Type: text/plain; charset="UTF-8"
>
> Phil,
>
>
> Thanks for sharing your experiences! I'll have to do some searching for
> roller mills.
>
>
> Thanks again,
>
>
> Jeff
>
>
>
> On Sun, 2011-08-28 at 09:50 -0700, Jack Homerson wrote:
> > I have used hammer mills, ball mills, and roller mills for size
> > reduction of both straw char and charcoal. In all cases the MC of the
> > char needs to be low enough not to make a paste (I have made this
> > mistake before). I used a New Holland mixer mill (hammer type), some
> > fine dust particles escape but it is not too bad, the most dust is
> > created when using the unloading auger to bag the char, this can be
> > mitigated by tying a filter cloth around the auger outlet.
> >
> > I have used a ball mill with ceramic balls and rubber door seals, this
> > is pretty much dust free but I found production to be terribly low and
> > product sizing to be very inconsistent.
> >
> > The very best I found is a roller mill. This is both fast and can be
> > "housed in" to easily control dust, then follow Mark's suggestions to
> > extract the very fine particles at the outlet. You can adjust sizing
> > by adjusting roller spacing, or adding another set of rollers below
> > the first. Cheap small roller mills can be found in the agri sector
> > but must be modified for char
> > purposes.
> >
> >
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Gasification mailing list
>
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
>
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> for more Gasifiers,  News and Information see our web site:
> http://gasifiers.bioenergylists.org/
>
>
>
> End of Gasification Digest, Vol 12, Issue 20
> ********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20110906/cddfdb1f/attachment.html>


More information about the Gasification mailing list