[Gasification] Calculations for a new gasifier
Oscar Jimenez
oscar at cubaenergia.cu
Mon Jan 9 07:18:04 CST 2012
Hello Robert.
Some years ago I websited a simple spreadsheet calculator which I think
could be of help for your task.
You can find it on this address: www.fluidynenz.250x.com. Once you get
there, please find, on the left column of that page, the title: " New engine
tables". From that site you can freely download my calculator. Should you
need further help on this issue, please feel free to contact me any time.
Kindest regards.
Oscar.
-----Mensaje original-----
De: gasification-bounces at lists.bioenergylists.org
[mailto:gasification-bounces at lists.bioenergylists.org] En nombre de Robert
Kana
Enviado el: Saturday, January 07, 2012 6:49 AM
Para: gasification at lists.bioenergylists.org
Asunto: Re: [Gasification] Calculations for a new gasifier
Wishing everybody healthy, happy and successful new year,
We are planning to built a gasifier, for a Mitsubishi 8DC9 engine. This
310 Hp engine, 1500 rpm at 50 Hz, has displacement 16031, 8 cyl with
cylinder diameters 135, length 153.1. This unit will be operating 24 hrs
a day as a main power source. Fuel will be sawdust briquettes ( 1.1 ton
m3 density), broken charcoal pieces and wood chips. This fuel will be
mixed in equal parts. Gasifier is a grate-less design, continuous feed
down draft.
Original design has a gas cooler heat exchanger after cyclone, water
cooler and tar condenser, palm oil washer, charcoal drum filters and a
bag filter.
We need some help calculating the amount of fuel needed to generate
enough power for 160 Kwe every hour. Suggestions are welcomed.
We also need some help converting the engine to work with the wood gas.
We know there are so many knowledgeable people on this list, I am sure
we can use many valuable advices from you. This unit will power our new
smaller scale saw dust waste charcoal factory, where electricity is very
expensive and we have no choice to go this direction. After building
some smaller units, which are still operating for thermal energy, this
new project will give us much more experience we need.
Your suggestions and comments are welcomed, thank you all in advance.
Robert Kana, Biomass Energy, Indonesia
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
Gasification at bioenergylists.org
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenerg
ylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
More information about the Gasification
mailing list