[Gasification] Gasification Digest, Vol 17, Issue 10Re: anaerobicc digester gas for IC engine

Rolf Uhle energiesnaturals at gmx.de
Fri Jan 20 03:24:22 CST 2012

Hallo all,

don't be afraid, there is not much problem with running on "normal" biogas as 
long as the engines stay hot and little or no condensation occurs.
This was first documented by J.Fry 50 (?) years ago and on thousands of 
occasions ever sice.
Washing and filtering through steel wool, which can be regenerated by simple 
aeration, is mostly enough.
There are thousands of engines running 8000h/a in northern Europe, specially 
 It is much easier than to run on woodgas, believe me !



Am Freitag, 20. Januar 2012 01:05:03 schrieb David Coote:
> Hi Anand,
> How do you find engine maintenance requirements running on biogas as
>  against running on diesel?
> Thanks
> David
> Message: 2
> Date: Thu, 19 Jan 2012 12:27:58 +0800
> From: Anand Karve<adkarve at gmail.com>
> To: Discussion of biomass pyrolysis and gasification
> 	<gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] anaerobicc digester gas for IC engine.
> Message-ID:
> 	<CACPy7Sd8upLZ68jwQpnsip4mU80waunCAaeN5WqZ4Ggu4p+muQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> Dear Phillip,
> I have been running two engines for several years on raw  biogas without
> cleaning it. One is attached to an electricity generator and the other one
> is attached to our char briquette extruder. Please note that we are not
> selling our biogas, but using it privately.
> We make our biogas from high calorie food waste and green leaves. It
> contains about 60 to 65% methane, about 34 to 40 % carbon dioxide, less
> than 1 % H2s and NH3 and some water vapour. When one runs an internal
> combustion engine, the air that enters the engine has about 80% nitrogen
> and when it is raining outside, the air entering the engine is saturated
> with water vapour, as in the case of biogas. The nitrogen, carbondioxide
> and water vapour just dilute the fuel gas, but if the mixture contains
> enough of the combustible gases, it can be used in an internal combustion
> engine.  We are also using producer gas at another location to run an
> electricity generator. Even the producer gas, which is used as fuel in this
> case, has nitrogen, sulphur dioxide, nitrous oxide and carbon dioxide. Just
> 25 years ago, the world used high sulphur diesel. It did not harm the
> engine. The sulphur content in the fuel was reduced out of environmental
> considerations. However, the environment need not worry a user of biogas or
> producer gas, because if the biomass does not get converted into biogas in
> an anaerobic digester, it is going to rot outside the digester, in nature,
> and release the sulphur and nitrogen in their oxidised forms  Both wood and
> biogas are being used as cooking fuel and they release the substances
> mentioned above. If you used a mixture having 97% carbon dioxide and just
> 3% methane, it won't be possible to run an internal combustion engine on
> it. But with biogas and producer gas, one can. Removing the carbon dioxide,
> moisture, ammonia and H2S from biogas just adds to the operating cost.
> Yours
> A.D.Karve
> _______________________________________________
> Gasification mailing list
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioener
> gylists.org
> for more Gasifiers,  News and Information see our web site:
> http://gasifiers.bioenergylists.org/

More information about the Gasification mailing list