[Gasification] Mk2 Chip Guillotine

[Doug]

Hi Paul and Colleagues,

Relax a bit, as it is now all drawn and with appropriate photos ready for my son to upload onto the Fluidyne Archive www.fluidynenz.250x.com

He alone does this so we wait for his busy schedule to do it for us. Don't complain that I only use "Imperial" measurements(:-)

Just remember that it is what it is, but plenty of opportunity to make it into other versions.

Doug Williams,
Fluidyne.



On Sun, 02 Feb 2014 14:54:20 -0600
Paul Anderson <psanders at ilstu.edu> wrote:

> Doug and all,
> 
> Yes, looks like great progress.   (I am slow to reply because of 
> extensive travel).
> 
> How will all of this fine work be finalized?   I think Doug said he was 
> going to provide final tech diagrams and photos, etc.
> 
> Let's make sure that this work is properly recorded and onto websites, 
> not just in the archives of the Listservs.   I will try to have one (or 
> more) made in Illinois, USA.
> 
> Who else will participate in the replication and testing and reporting 
> of results about this (or similar) device?
> 
> Paul
> 
> Doc  /  Dr TLUD  /  Prof. Paul S. Anderson, PhD
> Email:  psanders at ilstu.edu
> Skype: paultlud      Phone: +1-309-452-7072
> Website:  www.drtlud.com
> 
> On 1/24/2014 4:23 PM, Jason wrote:
> > Great one Doug,
> >
> > that is about what I had in mind and saves me that drawing :-) With 
> > playing around with pivot points it would be feasible to get peak 
> > leverage exactly where you want it,. Enough weight in the right place 
> > returns the foot pedal to the start point. Yes you have proven the 
> > concept.
> >
> > Kind Regards
> >
> > Jason
> >
> >
> > On Sat, Jan 25, 2014 at 10:45 AM, Doug <Doug.Williams at orcon.net.nz 
> > <mailto:Doug.Williams at orcon.net.nz>> wrote:
> >
> >
> >      Hi Jason and Colleagues,
> >
> >
> >      Thanks for all the ideas that have been promoted, and as you can
> >     see, I have completed all the variations possible within the
> >     limitations imposed by existing mechanisms. This pedal linkage
> >     allowed me to change rotating arcs, which in the end all determine
> >     the distance of travel and the forces at the cutting edge.
> >
> >      Having proven the simple hand guillotine both works and with a
> >     reasonable amount of force at the blade, that is the end of my
> >     involvement to make the concept principles into some thing else.
> >     It isn't hard for me to see, that larger mechanised versions could
> >     have plenty of scope to be included in all sorts of cutting
> >     applications, but don't expect me to design them for you(:-)
> >
> >      Will find time this week to draw up the design and make it
> >     available on the Fluidyne Archive www.fluidynenz.250x.com
> >     <http://www.fluidynenz.250x.com>   as soon as possible, and advise
> >     you accordingly.
> >
> >      Doug Williams,
> >      Fluidyne.
> >
> >
> >
> >
> >     > On Sat, 25 Jan 2014 08:42:51 +1300
> >     > Jason <urepedese at gmail.com <mailto:urepedese at gmail.com>> wrote:
> >     >
> >     > > Doug,
> >     > >
> >     > > I have an idea for the foot lever but will need a day so to
> >     get it drawn.
> >     > > It MAY help the design and hopefully incorporate increasing
> >     leverage to
> >     > > solve the issue Mark outlines.
> >     > >
> >     > > Jason
> >
> >
> >     --
> >     Doug <Doug.Williams at orcon.net.nz <mailto:Doug.Williams at orcon.net.nz>>
> >
> >     _______________________________________________
> >     Gasification mailing list
> >
> >     to Send a Message to the list, use the email address
> >     Gasification at bioenergylists.org
> >     <mailto:Gasification at bioenergylists.org>
> >
> >     to UNSUBSCRIBE or Change your List Settings use the web page
> >     http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
> >
> >     for more Gasifiers,  News and Information see our web site:
> >     http://gasifiers.bioenergylists.org/
> >
> >
> >
> >
> > _______________________________________________
> > Gasification mailing list
> >
> > to Send a Message to the list, use the email address
> > Gasification at bioenergylists.org
> >
> > to UNSUBSCRIBE or Change your List Settings use the web page
> > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
> >
> > for more Gasifiers,  News and Information see our web site:
> > http://gasifiers.bioenergylists.org/
> 


-- 
Doug <Doug.Williams at orcon.net.nz>