[Gasification] Question from Philip Pedros
tmiles at trmiles.com
tmiles at trmiles.com
Sat Sep 22 14:49:26 CDT 2018
Can untreated syngas generated from municipal wastewater sludge be used
directly to generate power? It is my understanding that the heating value
of untreated syngas (120 - 150 But/scf), is too low to feed directly to
engines and that some type of post treatment to boost the heating value to
190 -200 is typically economically prohibitive. Any information on such
post treatment and an case studies were this has been done would be
appreciated.
Thank you,
Philip Pedros
Philip B. Pedros, Ph.D., P.E., BCEE
Technical Lead II
AECOM
250 Apollo Drive
Chelmsford, MA 01824
C: 781 258-8829
Philip.Pedros at aecom.com <mailto:Philip.Pedros at aecom.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20180922/82cc03fb/attachment.html>
More information about the Gasification
mailing list