<br>the webcam is now on and tracking the power pallet run during the
workshop. it is also tracking the activities of people in the vicinity.
bear just drove a forklift through the picture.  see here for the live feed:  <a href="http://www.gekgasifier.com/webcam/">http://www.gekgasifier.com/webcam/</a><br>
<br>
the sound is currently coming through as feedback, so we shut it off, but will try to fix it.  anyways, the new kubota
engine is so shockingly quiet that you couldn't hear anything anyway .
. . ;-). well ok, you can hear it, but i'm amazed how smooth running
these kubotas are. it is very odd to have a proper industrial design
engine as this small of size. kubota does very impressive work.<br>
<br>
we're still configuring many details on both the power pallet and the
instrumentation, so we haven't yet started any formal long run tests.
this instrumentation now includes a 6 gas analyzer so we can get proper
gas composition and heating value numbers over the run. keeping a full
instrumentation suite up and running, along with tracking the fuel mass
and moisture input, energy output, and char/ash byproduct, is proving a
handful. the instrumentation is much more difficult than the gasifier
we're learning again . . .<br>
<br>
so in short, we're a bit behind as usual. but things should get
reasonably finished through starts and stops today, so we can do a full
day non-stop run tomorrow. we'll likely do that for a couple days
before considering an overnight run. we're seeing we need to step into
this, as we just completely tore apart the whole rig and reassembled it
in the last week for the new engine and genhead. we'll continue on this
combination of full day and some overnight runs until next weekend.<br>
<br>
hopefully at the end we'll have some good data clarifying many performance particulars over real world type long run situations.<br>
<br>
jim<br><br>