Helo Bear K<br> very good relevant literature work <div><br></div><div><br><div class="gmail_quote">On Wed, Dec 29, 2010 at 7:13 PM, Bear Kaufmann <span dir="ltr"><<a href="mailto:bear@allpowerlabs.org">bear@allpowerlabs.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">I looked through some of the papers I have on hand, and extracted the interesting parts as they relate to the latest discussion, FWIW:<br>

<br>
"Fuel gas can be used directly as fuel in gas burners or internal combustion engines and gas turbines. Fuel gas, after purification and possibly water gas shift to adjust the H2/CO ratio, can be described as a syngas (a mixture of H2 and CO), which can be used to manufacture methanol, ammonia, Fischer Tropsch liquids, or hydrogen for use in fuel cells (4). The suitability for a particular usage, i.e. the fuel gas quality, is determined by the gas composition and the level of contamination by particulates, alkali compounds, nitrogen-containing components, sulphur and tars (5)."<br>

from Kalisz, S. et al. Energy Balance of High Temperature Air/Steam Gasification of Biomass in Up-Draft, Fixed-Bed Type Gasifier. Int. Conf. on Incineration and Thermal Treatment Technologies, Phoenix, Arizona (2004).at <<a href="http://gasunie.eldoc.ub.rug.nl/FILES/root/2004/3265200/3265200.pdf" target="_blank">http://gasunie.eldoc.ub.rug.nl/FILES/root/2004/3265200/3265200.pdf</a>><br>

<br>
"Fast pyrolyzers rapidly (∼1 s) heat dry biomass (10% H2O) to ∼500°C and thereby thermally transform biomass into bio-oil (∼60% of mass), syngas (∼20% of mass), and charcoal (∼20% of mass). The energy required to operate a fast pyrolyzer is ∼15% of the total energy that can be derived from the dry biomass. Modern systems are designed to use the syngas generated by the pyro- lyzer to provide all the energy needs of the pyrolyzer."<br>

from Laird, D.A. The Charcoal Vision: A Win Win Win Scenario for Simultaneously Producing Bioenergy, Permanently Sequestering Carbon, while Improving Soil and Water Quality. Agron J 100, 178-181(2008).<br>
<br>
"To improve the thermal efficiency and predict the composition of syngas, several numeric models have been developed for biomass conversion systems."<br>
from Rogel, A. & Aguillón, J. The 2D Eulerian Approach of Entrained Flow and Temperature in a Biomass Stratified Downdraft Gasifier. American Journal of Applied Sciences 3, 2068-2075(2006).<br>
Comments: Shows a stratified downdraft model with inputs of air and biomass, outputs of syngas and ashes<br>
<br>
"The term ‘pyrolysis’ is typically used either for ...[analytical purposes]... or for bioenergy systems that capture the off-gases emitted during charring and used to produce hydrogen, syngas, bio-oils, heat or electricity (Bridgwater et al, 1999)."<br>

from Lehmann, J. & Joseph, S. Biochar for environmental management: science and technology. (Earthscan/James & James: 2009).<br>
<br>
"High purity syngas (i.e. low quantities of inerts such as N2) is extremely beneficial for fuels and chemicals synthesis since it substantially reduces the size and cost of downstream equipment. However, the guidelines provided in Table 5 should not be interpreted as stringent requirements. "<br>

"There is more latitude with regard to syngas composition for engine combustion than for turbine combustion."<br>
"To be considered interchangeable with conventional fossil fuels (natural gas or distillate oils) and to ensure maximum flexibility for industrial or utility applications, syngas heating value needs to be above 11 MJ/m3"<br>

"At temperatures greater than 1200-1300oC, little or no methane, higher hydrocarbons or tar is formed, and H2 and CO production is maximized without requiring a further conversion step."<br>
"Biomass gasification is the conversion of an organic...carbonaceous feedstock by partial oxidation into a gaseous product, synthesis gas or “syngas,” consisting primarily of [H2 and CO] with lesser amounts of [CO2, CH4], higher hydrocarbons (C2+), and nitrogen (N2). The reactions are carried out at elevated temperatures, 500-1400oC, and atmospheric or elevated pressures up to 33 bar (480 psia). The oxidant used can be air, pure oxygen, steam or a mixture of these gases. Air-based gasifiers typically produce a product gas containing a relatively high concentration of nitrogen with a low heating value between 4 and 6 MJ/m3 (107-161 Btu/ft3). Oxygen and steam-based gasifiers produce a product gas containing a relatively high concentration of hydrogen and CO with a heating value between 10 and 20 MJ/m3 (268-537 Btu/ft3)."<br>

"Table 8. Compositions of Biomass-Derived Syngas" - includes N2 from 0-56%, H2 from 5-43.3%, CO from 9-67%, CO2 from 4-40%<br>
...<br>
from Ciferno, J.P. & Marano, J.J. Benchmarking biomass gasification technologies for fuels, chemicals and hydrogen production. US Dep of Energy NETL (2002).at <<a href="http://seca.doe.gov/technologies/coalpower/gasification/pubs/pdf/BMassGasFinal.pdf" target="_blank">http://seca.doe.gov/technologies/coalpower/gasification/pubs/pdf/BMassGasFinal.pdf</a>><br>

<br>
"The resulting fuel is a producer gas (a synthesis gas or syngas) that consists primarily of varying ratios of hydrogen and carbon monoxide (CO)."<br>
from Mukhtar, S. Manure to Energy: Understanding Processes, Principles and Jargon. (2006).at <<a href="http://repository.tamu.edu/bitstream/handle/1969.1/87462/pdf_2425.pdf?sequence=1" target="_blank">http://repository.tamu.edu/bitstream/handle/1969.1/87462/pdf_2425.pdf?sequence=1</a>><br>

<br>
In short, the usage from the above doesn't appear entirely clear.<br>
But in general, syngas is often suggested to have been upgraded, or of a higher CO/H2/energy content. Syngas is often used to refer to gas intended to be used for synthesis of products. Syngas does also seem to be used as general term in some cases.<br>

<br>
My preferred usage has been to call the gas the air-blown GEK makes "producer gas". Wood gas notes that the carbon source was biomass, though I don't prefer the term. "Syngas" being made with O2 or steam.<br>

The problem with the above is it doesn't leave a general catch-all term.<br>
<br>
Cheers,<br>
Bear Kaufmann<br>
All Power Labs<br>
<br>
_______________________________________________<br>
The Gasification list has moved to<br>
<a href="mailto:gasification@bioenerglists.org" target="_blank">gasification@bioenerglists.org</a> - please update your email contacts to reflect the change.<br>
Please visit <a href="http://info.bioenergylists.org" target="_blank">http://info.bioenergylists.org</a> for more news on the list move.<br>
Thank you,<br>
Gasification Administrator</blockquote></div><br><br clear="all">your truely<br>-- <br>************************************************<br>P.V.PANNIRSELVAM<br>ASSOCIATE . PROF.<br>Research Group ,GPEC, Coordinator <br>Computer aided  Cost engineering<br>
<br>DEQ – Departamento de Engenharia Química<br>CT – Centro de Tecnologia / UFRN, Lagoa Nova – Natal/RN<br>Campus Universitário. CEP: 59.072-970<br>North East,Brazil<br>*******************************************<br><a href="https://sites.google.com/a/biomassa.eq.ufrn.br/sites/">https://sites.google.com/a/biomassa.eq.ufrn.br/sites/</a><br>
 and <br><a href="http://ecosyseng.wetpaint.com/">http://ecosyseng.wetpaint.com/</a><br><br><br>Fone ;Office<br>84 3215-3769 ,  Ramal 210<br>Home : 84 3217-1557<br><br>Mobile :558488145083<br><br>Email:<br><a href="mailto:pvpa@msn.com">pvpa@msn.com</a><br>
<a href="mailto:panruti2002@yahoo.com">panruti2002@yahoo.com</a><br><a href="mailto:pannirbr@gmail.com">pannirbr@gmail.com</a><br><a href="mailto:pvpa@msn.com">pvpa@msn.com</a><br><br><br><br>
</div>