<br>We're now in the midst of our <a href="http://www.gekgasifier.com/workshop/" target="_blank">Father’s Day Gasification workshop</a> at ALL Power Labs in Berkeley, CA. We have about 75 people here from near and far to wander down the rabbit hole of biomass thermal conversion.<br>
<div class="gmail_quote">
<br>For those of you not able to join us, we have a webcam on the 10 kW Power
Pallet endurance run. You can watch the progress here: <a href="http://www.gekgasifier.com/webcam/" target="_blank">http://www.gekgasifier.com/webcam/</a> <br><br>We plan 50 hours over the next several days with datalogging of the wood chip fuel in to power out particulars. We started yesterday afternoon and ran straight through the night. So far 24+ hours constant run without issues. We pulled the filter apart at 24hours and were happy to find it nice and clean. No bell reduction bell packing either, which has lately been our biggest challenge on long runs. Some minor tweaks to grate design seem to have cleared up the problem. <br>
<br>We have the full datalogging regime up and running so we should soon have a good set of info on fuel in to power out particulars, as well as system temps, pressures, and gas composition numbers. The fuel we are using is chipped cedar from the local landscaping supply company. We've sifted out the overs and unders, but otherwise it is standard disk chipper wood chip.<br>
<br>There are lots of good pictures of the workshop proceedings here in Facebook:<br><a href="http://www.facebook.com/media/set/?set=a.10150219877157611.312016.330512257610&l=ee47069901">http://www.facebook.com/media/set/?set=a.10150219877157611.312016.330512257610&l=ee47069901</a><br>
<br>We'll continue this eve, and likely some more tomorrow if anyone wants to stop by. The original info on the workshop is copied below.<br><br>jim<br><br><br><br><br><div class="gmail_quote">---------- Forwarded message ----------<br>
From: <b class="gmail_sendername">jim mason</b> <span dir="ltr"><<a href="mailto:jim@allpowerlabs.org" target="_blank">jim@allpowerlabs.org</a>></span><br>
Date: Fri, Jun 10, 2011 at 10:56 AM<br>Subject: Gasification and Biochar workshop in 1 week. Project and schedule details contained herein.<br>To: Icp <<a href="mailto:icp@spaceship.com" target="_blank">icp@spaceship.com</a>><br>
<br>
<br><br><div class="gmail_quote"><br><img title="topdownfrontwithjay_img_2042-800-300.jpg" alt="topdownfrontwithjay_img_2042-800-300.jpg" src="cid:ii_13055b61db159fca"><br><br clear="all">
<p><span style="font-size: medium;"><b><span style="font-size: small;">Father's Day Gasification and Biochar Workshop: June 17-19, 2011</span></b></span><i><br><br>
Opening Intro & Lecture: Friday, June 17, 7:30 – 9:30PM<br>
Weekend Build, Run and Test: Saturday and Sunday, June 17-19, 11am – 7pm</i></p>
<p><i><a href="http://www.gekgasifier.com/about/workshop/travel-and-accomodation/" target="_blank">Location: ALL Power Labs, 1010 Murray Street, Berkeley CA 94710</a><br>
Cost: Free if you are a GEK or BEK owner, either through self build or purchase. Otherwise, $100 for weekend</i>.<br>
<span style="color: rgb(255, 0, 0);"><span style="color: rgb(128, 0, 0);"><a href="http://www.gekgasifier.com/forums/showthread.php?p=2145#post2145" target="_blank">RSVP to the forum here.</a></span> <span style="color: rgb(153, 51, 0);"><a href="http://www.gekgasifier.com/about/workshop/sign-up/" target="_blank">Buy your spot here.</a></span></span></p>
<p><span style="color: rgb(255, 0, 0);"><span style="color: rgb(153, 51, 0);"><br>
</span></span></p>
Our summer workshop is fast approaching- June 17th - 19th. Many of you have already RSVP'ed and are flying in from the 4 corners, but there is still room for more. So come join us for a quality Father's Day weekend of wrenching, rotating machinery, and guided tour down the rabbit hole of biomass thermal conversion.<br>
<p>The workshop begins with a Friday evening talk on the science of
gasification and pyrolysis, and the new engineering solutions embodied
in the GEK gasifier and BEK biochar maker. Saturday and Sunday are full days of building, running and testing
the physical particulars. Come prepared to get your hands dirty building and running machinery. We learn through both talking and working.<br></p><p>We'll have 4 projects going in parallel for this round of the workshop. You can participate in all of them, and wander between them as desired.<br>
<br></p><p><b>1. 50 Hour Endurance run of the 10kw Power Pallet:<br></b>Long proving runs of the Power Pallet continue on this end. This round we'll do a total of 50 hours over several days. We have it on good authority that it will not rain this time, and we'll be sure to have plenty of reasonable fuel on hand before we start. We look forward to more refined data on fuel consumption, gas composition, and feedback on general usability from you kicking the tires over the weekend. Runs will start on Saturday and continue into the early part of the following week. If you can't be here, we'll have a webcam on the proceedings as usual.<br>
</p><p>This test will use one of the current generation stainless steel Power Pallets pictured here: <a href="http://www.gekgasifier.com/wpgallery/" target="_blank">http://www.gekgasifier.com/wpgallery/</a><br><br></p><p>
<b>2. Demonstration runs of the 20kw Power Pallet:</b><br>
Those of you interested in the larger 20kw Power Pallet will can finally see one in action over the weekend. There will also be 8 of the 20kw Power Pallets under assembly in the APL factory, so you can see how we make them. Things will look something like this, only bigger: <a href="http://wiki.gekgasifier.com/w/file/40416596/batch2onthefloor.JPG" target="_blank">http://wiki.gekgasifier.com/w/file/40416596/batch2onthefloor.JPG</a>. The engineers and builders of these units will be on hand to answer questions and explain the details.<br>
<br></p><b>3. GEK Gasifier Building:<br></b>Want to build you own gasifier? Here's your chance to do it, using our tools and with plenty of instruction from the local crew. <br><br>This round of the workshop we're having a special GEK Level III building clinic. We have tables and welders for 4 people who want to weld together a kit over the weekend. Given clear inhouse instruction, you should be able to get through the building process by the end of Sunday. Finished gasifiers can Russian doll back into the hopper and filter
for checking as oversize baggage on the plane. Yes this does work. We
do this regularly. <br><br>Anyone who wants to do this will need to reserve a spot by purchasing a Level III weld together GEK kit. There is no additional cost for instruction, using our tools, and burning our welding wire. The workshop is also free if you get a kit. We're trying to make this easy and accessible.<br>
<br>Again, there are ONLY 4 slots for gasifier building. Welders are limited. Please reserve ahead of time if you want to build a kit. <br> <br><br>
<b>4. BEK Biochar maker running:<br></b><br>We continue to have the BEK on hold while we focus on ramping up the Power Pallet production. This has made quite a few people unhappy, as there is so few small scale biochar making machines available at the moment. We're trying to get back to making these as soon as possible, but in the meantime we wanted to give the interested a chance to run our in house machine. <br>
<br>We'll have the BEK on fire both Saturday and Sunday of the workshop. You are welcome to bring your feedstock of interest and run it through. Or, you can experiment with our variety of feedstocks on location. If you have some you want to bring, please do write us beforehand so we can coordinate the details.<br>
<br><br><b><br>General Info and Signup</b><br>
<p>The APL workshop series offers education,
research reports and hands-on experience to bring more people to
successful operation of small scale gasification and pyrolysis units.
The event is open to everyone, not just GEK or BEK users/owners. Worshops are free if you own a GEK or BEK by either purchase or DIY
build. Otherwise the weekend is $100, which helps to cover food, drink
and other consumables.</p><p>If you want to join us, please RSVP to the forum
thread here: <a href="http://www.gekgasifier.com/forums/showthread.php?t=563" target="_blank">http://www.gekgasifier.com/forums/showthread.php?t=563</a><br></p><p> If you need to pay the workshop fee, you can do so via
credit card here: <a href="http://www.gekgasifier.com/about/workshop/sign-up/" target="_blank">http://www.gekgasifier.com/about/workshop/sign-up/</a><br></p><p>Information on local accommodation, maps and airports is here: <a href="http://www.gekgasifier.com/about/workshop/travel-and-accomodation/" target="_blank">http://www.gekgasifier.com/about/workshop/travel-and-accomodation/</a><br>
</p><p><br></p><p>We look forward to seeing you here soon.</p><br>jim<br><br><br><br>-- <br>------------------------------------------------------------------------------<br>Jim Mason<br>Website: <a href="http://www.whatiamupto.com" target="_blank">http://www.whatiamupto.com</a><br>
Current Projects: <br> - Gasifier Experimenters Kit (the GEK): <a href="http://www.gekgasifier.com" target="_blank">http://www.gekgasifier.com</a><br> - Escape from Berkeley alt fuels vehicle race: <a href="http://www.escapefromberkeley.com" target="_blank">www.escapefromberkeley.com</a><br>
- ALL Power Labs on Twitter: <a href="http://twitter.com/allpowerlabs" target="_blank">http://twitter.com/allpowerlabs</a><br> - Shipyard Announce list: <a href="http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com" target="_blank">http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com</a><br>
<br>
</div>
</div><br><br clear="all"><br>-- <br>------------------------------------------------------------------------------<br><font color="#888888">Jim Mason<br>Website: <a href="http://www.whatiamupto.com" target="_blank">http://www.whatiamupto.com</a><br>
Current Projects: <br>
- Gasifier Experimenters Kit (the GEK): <a href="http://www.gekgasifier.com" target="_blank">http://www.gekgasifier.com</a><br> - Escape from Berkeley alt fuels vehicle race: <a href="http://www.escapefromberkeley.com" target="_blank">www.escapefromberkeley.com</a><br>
- ALL Power Labs on Twitter: <a href="http://twitter.com/allpowerlabs" target="_blank">http://twitter.com/allpowerlabs</a><br> - Shipyard Announce list: <a href="http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com" target="_blank">http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com</a><br>
</font></div><br><br clear="all"><br>-- <br>------------------------------------------------------------------------------<br>Jim Mason<br>Website: <a href="http://www.whatiamupto.com">http://www.whatiamupto.com</a><br>Current Projects: <br>
- Gasifier Experimenters Kit (the GEK): <a href="http://www.gekgasifier.com">http://www.gekgasifier.com</a><br> - Escape from Berkeley alt fuels vehicle race: <a href="http://www.escapefromberkeley.com">www.escapefromberkeley.com</a><br>
- ALL Power Labs on Twitter: <a href="http://twitter.com/allpowerlabs">http://twitter.com/allpowerlabs</a><br> - Shipyard Announce list: <a href="http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com">http://lists.spaceship.com/listinfo.cgi/icp-spaceship.com</a><br>