Dear All,<br />
<br />
In biomass gasification<br />
<br />
a.      1TPH down draft gasifier 1500kg /hr air flow is needed for 1ton <br />
of wood is gasified. So gas produced for 2500 kg /hr. Air blower <br />
pressure is 300mm water column. Air blower CFM is 1000.<br />
<br />
Practically, for some people using <br />
<br />
b.      The same 1TPH down draft gasifier using air blower pressure is <br />
600 to 1000 mm water column. Air blower CFM is 2000.<br />
<br />
Whether a / b is correct? Or not <br />
<br />
Explain.<br />
<br />
A.      Saravanakumar<br />
<br />
On Sat, 27 Aug 2011 00:32:22 +0530  wrote<br />
>Send Gasification mailing list submissions to<br />
<br />
gasification@lists.bioenergylists.org<br />
<br />
<br />
<br />
To subscribe or unsubscribe via the World Wide Web, visit<br />
<br />
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org<br />
<br />
<br />
<br />
or, via email, send a message with subject or body 'help' to<br />
<br />
gasification-request@lists.bioenergylists.org<br />
<br />
<br />
<br />
You can reach the person managing the list at<br />
<br />
gasification-owner@lists.bioenergylists.org<br />
<br />
<br />
<br />
When replying, please edit your Subject line so it is more specific<br />
<br />
than "Re: Contents of Gasification digest..."<br />
<br />
<br />
<br />
<br />
<br />
Today's Topics:<br />
<br />
<br />
<br />
  1. Charcoal Reduction Mill (Jeff Davis)<br />
<br />
  2. Re: Charcoal Reduction Mill (Pannirselvam P.V)<br />
<br />
  3. Re: Charcoal Reduction Mill (Mark E. Ludlow)<br />
<br />
<br />
<br />
<br />
<br />
----------------------------------------------------------------------<br />
<br />
<br />
<br />
Message: 1<br />
<br />
Date: Thu, 25 Aug 2011 23:55:53 -0400<br />
<br />
From: Jeff Davis <jeff0124@velocity.net><br />
<br />
To: Gasification List <gasification@lists.bioenergylists.org><br />
<br />
Subject: [Gasification] Charcoal Reduction Mill<br />
<br />
Message-ID: <1314330953.1414.92.camel@jeff-laptop><br />
<br />
Content-Type: text/plain; charset="UTF-8"<br />
<br />
<br />
<br />
Dear List,<br />
<br />
<br />
<br />
<br />
<br />
What would be the best style of mill to reduce weed and soft wood<br />
<br />
charcoal (mostly weed). This would be for charcoal Fireball production.<br />
<br />
All advice will be appreciated.<br />
<br />
<br />
<br />
Reduction might be 2 mm to dust. Enough dust to fill in the larger 2 mm<br />
<br />
particles. Might be possible to have some particles larger than 2 mm.<br />
<br />
<br />
<br />
Production is difficult for me to pin down but lets say 400 lbs/hr (180<br />
<br />
kg/hr). More is better but less would be OK for now. The more I think<br />
<br />
about it a lot less would work for now.<br />
<br />
<br />
<br />
Would a farm hammer mill with cyclone bagger be a formula for a dust<br />
<br />
storm?<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Clueless,<br />
<br />
<br />
<br />
<br />
<br />
Jeff<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
------------------------------<br />
<br />
<br />
<br />
Message: 2<br />
<br />
Date: Fri, 26 Aug 2011 01:10:33 -0300<br />
<br />
From: "Pannirselvam P.V" <pannirbr@gmail.com><br />
<br />
To: Discussion of biomass pyrolysis and gasification<br />
<br />
<gasification@lists.bioenergylists.org><br />
<br />
Subject: Re: [Gasification] Charcoal Reduction Mill<br />
<br />
Message-ID:<br />
<br />
<CADw81mcSDsEQqjKoQ1B2wTSJU6BdetqrwPPm0__77CqJe3hctw@mail.gmail.com><br />
<br />
Content-Type: text/plain; charset="windows-1252"<br />
<br />
<br />
<br />
Helo Jeff<br />
<br />
<br />
<br />
  Ball mill can solve the problems<br />
<br />
<br />
<br />
On Fri, Aug 26, 2011 at 12:55 AM, Jeff Davis <jeff0124@velocity.net> wrote:<br />
<br />
<br />
<br />
> Dear List,<br />
<br />
><br />
<br />
><br />
<br />
> What would be the best style of mill to reduce weed and soft wood<br />
<br />
> charcoal (mostly weed). This would be for charcoal Fireball production.<br />
<br />
> All advice will be appreciated.<br />
<br />
><br />
<br />
> Reduction might be 2 mm to dust. Enough dust to fill in the larger 2 mm<br />
<br />
> particles. Might be possible to have some particles larger than 2 mm.<br />
<br />
><br />
<br />
> Production is difficult for me to pin down but lets say 400 lbs/hr (180<br />
<br />
> kg/hr). More is better but less would be OK for now. The more I think<br />
<br />
> about it a lot less would work for now.<br />
<br />
><br />
<br />
> Would a farm hammer mill with cyclone bagger be a formula for a dust<br />
<br />
> storm?<br />
<br />
><br />
<br />
><br />
<br />
><br />
<br />
> Clueless,<br />
<br />
><br />
<br />
><br />
<br />
> Jeff<br />
<br />
><br />
<br />
><br />
<br />
> _______________________________________________<br />
<br />
> Gasification mailing list<br />
<br />
><br />
<br />
> to Send a Message to the list, use the email address<br />
<br />
> Gasification@bioenergylists.org<br />
<br />
><br />
<br />
> to UNSUBSCRIBE or Change your List Settings use the web page<br />
<br />
><br />
<br />
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org<br />
<br />
><br />
<br />
> for more Gasifiers, News and Information see our web site:<br />
<br />
> http://gasifiers.bioenergylists.org/<br />
<br />
><br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
-- <br />
<br />
************************************************<br />
<br />
P.V.PANNIRSELVAM<br />
<br />
ASSOCIATE . PROF.<br />
<br />
Research Group ,GPEC, Coordinator<br />
<br />
Computer aided Cost engineering<br />
<br />
<br />
<br />
DEQ ? Departamento de Engenharia Qu?mica<br />
<br />
CT ? Centro de Tecnologia / UFRN, Lagoa Nova ? Natal/RN<br />
<br />
Campus Universit?rio. CEP: 59.072-970<br />
<br />
North East,Brazil<br />
<br />
*******************************************<br />
<br />
https://sites.google.com/a/biomassa.eq.ufrn.br/sites/<br />
<br />
 and<br />
<br />
http://ecosyseng.wetpaint.com/<br />
<br />
<br />
<br />
<br />
<br />
Fone ;Office<br />
<br />
84 3215-3769 , Ramal 210<br />
<br />
Home :84 3217-1557<br />
<br />
<br />
<br />
Mobile :558488145083<br />
<br />
<br />
<br />
Email:<br />
<br />
pvpa@msn.com<br />
<br />
panruti2002@yahoo.com<br />
<br />
pannirbr@gmail.com<br />
<br />
pvpa@msn.com<br />
<br />
-------------- next part --------------<br />
<br />
An HTML attachment was scrubbed...<br />
<br />
URL: <br />
<http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/2<br />
0110826/c8c060c8/attachment-0001.html><br />
<br />
<br />
<br />
------------------------------<br />
<br />
<br />
<br />
Message: 3<br />
<br />
Date: Thu, 25 Aug 2011 21:14:31 -0700<br />
<br />
From: "Mark E. Ludlow" <mark@ludlow.com><br />
<br />
To: "'Discussion of biomass pyrolysis and gasification'"<br />
<br />
<gasification@lists.bioenergylists.org><br />
<br />
Subject: Re: [Gasification] Charcoal Reduction Mill<br />
<br />
Message-ID: <0ce601cc63a6$a8411420$f8c33c60$@ludlow.com><br />
<br />
Content-Type: text/plain;charset="us-ascii"<br />
<br />
<br />
<br />
Hi Jeff,<br />
<br />
<br />
<br />
A small hammer mill would be fine, but you need to run it under negative<br />
<br />
pressure to keep from making a mess. Start at the back end with a small<br />
<br />
blower good for 12" suction. Then a fake baghouse (three old Shopvacs in<br />
<br />
parallel would be fine.) Then, a tall skinny, cyclone (high-efficiency) with<br />
<br />
a downleg terminated with a couple butterfly valves operating 90deg out of<br />
<br />
phase as an airlock. This dumps into your collection bag/drum.<br />
<br />
<br />
<br />
Of course, any kind of feed auger makes things more fun. Get a fine screen<br />
<br />
for the mill and don't push things to prevent a conflagration which would<br />
<br />
ruin anyone's day. The cyclone is about 99% efficient by weight, so it takes<br />
<br />
the load off your "baghouse".<br />
<br />
<br />
<br />
An even simpler solution is a homebrew ball or rod mill.<br />
<br />
<br />
<br />
Mark<br />
<br />
<br />
<br />
-----Original Message-----<br />
<br />
From: gasification-bounces@lists.bioenergylists.org<br />
<br />
[mailto:gasification-bounces@lists.bioenergylists.org] On Behalf Of Jeff<br />
<br />
Davis<br />
<br />
Sent: Thursday, August 25, 2011 8:56 PM<br />
<br />
To: Gasification List<br />
<br />
Subject: [Gasification] Charcoal Reduction Mill<br />
<br />
<br />
<br />
Dear List,<br />
<br />
<br />
<br />
<br />
<br />
What would be the best style of mill to reduce weed and soft wood charcoal<br />
<br />
(mostly weed). This would be for charcoal Fireball production.<br />
<br />
All advice will be appreciated.<br />
<br />
<br />
<br />
Reduction might be 2 mm to dust. Enough dust to fill in the larger 2 mm<br />
<br />
particles. Might be possible to have some particles larger than 2 mm.<br />
<br />
<br />
<br />
Production is difficult for me to pin down but lets say 400 lbs/hr (180<br />
<br />
kg/hr). More is better but less would be OK for now. The more I think about<br />
<br />
it a lot less would work for now.<br />
<br />
<br />
<br />
Would a farm hammer mill with cyclone bagger be a formula for a dust storm?<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Clueless,<br />
<br />
<br />
<br />
<br />
<br />
Jeff<br />
<br />
<br />
<br />
<br />
<br />
_______________________________________________<br />
<br />
Gasification mailing list<br />
<br />
<br />
<br />
to Send a Message to the list, use the email address<br />
<br />
Gasification@bioenergylists.org<br />
<br />
<br />
<br />
to UNSUBSCRIBE or Change your List Settings use the web page<br />
<br />
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenerg<br />
<br />
ylists.org<br />
<br />
<br />
<br />
for more Gasifiers, News and Information see our web site:<br />
<br />
http://gasifiers.bioenergylists.org/<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
------------------------------<br />
<br />
<br />
<br />
_______________________________________________<br />
<br />
Gasification mailing list<br />
<br />
<br />
<br />
to Send a Message to the list, use the email address<br />
<br />
Gasification@bioenergylists.org<br />
<br />
<br />
<br />
to UNSUBSCRIBE or Change your List Settings use the web page<br />
<br />
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org<br />
<br />
<br />
<br />
for more Gasifiers, News and Information see our web site:<br />
<br />
http://gasifiers.bioenergylists.org/<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
End of Gasification Digest, Vol 12, Issue 17<br />
<br />
********************************************<br />
<br><Table border=0 Width=100% Height=57 cellspacing=0 cellpadding=0 style="font-family:Verdana;font-size:11px;line-height:15px;"><TR><td><A HREF="http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?" target="_blank"><IMG SRC="http://sigads.rediff.com/RealMedia/ads/adstream_nx.ads/www.rediffmail.com/signatureline.htm@Middle"></A></td></TR></Table><br>Treat yourself at a restaurant, spa, resort and much more with <b><a href="http://track.rediff.com/click?url=___http://dealhojaye.rediff.com?sc_cid=mailsignature___&cmp=signature&lnk=rediffmailsignature&newservice=deals" target ="_new">Rediff Deal ho jaye!</a></b>