<div>Dear Darius,</div>
<div>if you want to char biomass, you must have a kiln for charring it. The kilns are mainly of two types. In the oven and retort kiln, the biomass is filled into a closed vessel which is heated from outside. The pyrolysis gas escapes through a vent in the vessel, leaving the charred matter behind. The renaissance painters used to make their charcoal sticks by using this process. Also Yuri Yudkevich in Russia uses this type of a kiln for making charcoal on a commercial scale. In the TLUD type of kin, which is generally used by most others, the biomass is filled into the kiln, which is open at the top and which also has holes in the bottom for allowing fresh air into the kiln. The biomass is ignited from the top, so that the fire traverses downwards. The air needed for maintaining the fire comes into the kiln through the holes at the base of the kiln. It rises up and the oxygen in the air is consumed by the burning biomass. Therefore this kiln is called the Top Lit Up-Draft (TLUD) kiln. </div>
<div>Yours</div>
<div>A.D.Karve<br><br></div>
<div class="gmail_quote">On Mon, Feb 20, 2012 at 9:17 PM, darius tamizi <span dir="ltr"><<a href="mailto:darius_tamizi@hotmail.com">darius_tamizi@hotmail.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div>
<div dir="ltr">Dear Mr. Wu, Mr.Karve<br><br>Thank you very much for the paper and explantion. I can undestand the theory, but I do not know how the apparatus looks like (exp. Oven with N2) and how can I do all the explanation without the apparatus. Could you help me more about it?<br>
<br>Regards,<br><br>Darius<br><br><br>
<div>
<div></div>
<hr>
Date: Mon, 20 Feb 2012 10:21:15 +0800<br>From: <a href="mailto:adkarve@gmail.com" target="_blank">adkarve@gmail.com</a><br>To: <a href="mailto:gasification@lists.bioenergylists.org" target="_blank">gasification@lists.bioenergylists.org</a><br>
Subject: Re: [Gasification] Active charcoal<br><br>
<div>Dear Darius,</div>
<div> Normally one needs relatively high temperature to make active charcoal, but the pretreatment with calcium chloride allows us to make active charcoal even at relatively low temperatures. We make charcoal from light biomass like agricultural waste and use a TLUD type kiln. You would have to conduct experiments using your biomass and your process of charring to see if this pretreatment works in your case or not. <br>
Yours</div>
<div>A.D.Karve<br></div>
<div>On Sat, Feb 18, 2012 at 11:01 PM, Darius <span dir="ltr"><<a href="mailto:darius_tamizi@hotmail.com" target="_blank">darius_tamizi@hotmail.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:rgb(204,204,204) 1px solid;PADDING-LEFT:1ex">
<div>Dear Dr. A.D. Karve<br><br>Charring material are rubber wood.<br><br>Could you tell me the detail process?<br><br>Regards,<br><br>Darius<br><br>On 2/18/2012 9:56 PM, Anand Karve wrote:
<blockquote>
<div>Dear Darius,</div>
<div>what material are you charring? We make our charcoal from leaves of sugarcane, which are discarded during the process of sugarcane harvest. By soaking the leaves in 5% solution of calcium chloride, dying them and then converting them into char in a TLUD kiln gives us active charcoal. We have not tested this process in the case of woody material. Perhaps you can do this experiment. <br>
Yours</div>
<div>A.D.Karve<br></div>
<div>On Sat, Feb 18, 2012 at 10:14 PM, Darius <span dir="ltr"><<a href="mailto:darius_tamizi@hotmail.com" target="_blank">darius_tamizi@hotmail.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:rgb(204,204,204) 1px solid;PADDING-LEFT:1ex">
<div>Dear all,<br> <br>Is somebody there can help me to convert our char into active charcoal?<br><br>Regards,<br><br>Darius<br><br> <br>Dr. A.D. Karve<br>Trustee & Founder President, Appropriate Rural Technology Institute (ARTI)<br>
<br><br></div></blockquote></div><br>
<fieldset></fieldset> <br><pre>_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
<a href="mailto:Gasification@bioenergylists.org" target="_blank">Gasification@bioenergylists.org</a>
to UNSUBSCRIBE or Change your List Settings use the web page
<a href="http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org</a>
for more Gasifiers, News and Information see our web site:
<a href="http://gasifiers.bioenergylists.org/" target="_blank">http://gasifiers.bioenergylists.org/</a>
</pre></blockquote><br></div><br>_______________________________________________<br>Gasification mailing list<br><br>to Send a Message to the list, use the email address<br><a href="mailto:Gasification@bioenergylists.org" target="_blank">Gasification@bioenergylists.org</a><br>
<br>to UNSUBSCRIBE or Change your List Settings use the web page<br><a href="http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org</a><br>
<br>for more Gasifiers, News and Information see our web site:<br><a href="http://gasifiers.bioenergylists.org/" target="_blank">http://gasifiers.bioenergylists.org/</a><br><br></blockquote></div><font color="#888888"><br>
<br clear="all"><br>-- <br>***<br>Dr. A.D. Karve<br>Trustee & Founder President, Appropriate Rural Technology Institute (ARTI)<br><br><br><br>_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address <a href="mailto:Gasification@bioenergylists.org" target="_blank">Gasification@bioenergylists.org</a> to UNSUBSCRIBE or Change your List Settings use the web page <a href="http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org</a> for more Gasifiers, News and Information see our web site: <a href="http://gasifiers.bioenergylists.org/" target="_blank">http://gasifiers.bioenergylists.org/</a></font></div>
</div></div><br>_______________________________________________<br>Gasification mailing list<br><br>to Send a Message to the list, use the email address<br><a href="mailto:Gasification@bioenergylists.org">Gasification@bioenergylists.org</a><br>
<br>to UNSUBSCRIBE or Change your List Settings use the web page<br><a href="http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org</a><br>
<br>for more Gasifiers, News and Information see our web site:<br><a href="http://gasifiers.bioenergylists.org/" target="_blank">http://gasifiers.bioenergylists.org/</a><br><br></blockquote></div><br><br clear="all"><br>
-- <br>***<br>Dr. A.D. Karve<br>Trustee & Founder President, Appropriate Rural Technology Institute (ARTI)<br><br><br>