<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:o = "urn:schemas-microsoft-com:office:office"><HEAD>
<META content="text/html; charset=US-ASCII" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.23536"></HEAD>
<BODY style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 10pt" id=role_body
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document
color=#000000 size=2 face=Arial>
<DIV>Phil,</DIV>
<DIV> Why not make the exhaust manifold, the structural part of the
pyrolysis section of our gasifier.</DIV>
<DIV> A heavily loaded gasoline engine driving an alternator will produce
enough waste heat to carbonize the biomass.</DIV>
<DIV> </DIV>
<DIV>GF </DIV>
<DIV> </DIV>
<DIV>
<DIV>In a message dated 11/28/2013 6:32:44 P.M. Eastern Standard Time,
phil@marshbros.ca writes:</DIV>
<BLOCKQUOTE
style="BORDER-LEFT: blue 2px solid; PADDING-LEFT: 5px; MARGIN-LEFT: 5px"><FONT
style="BACKGROUND-COLOR: transparent" color=#000000 size=2 face=Arial>
<DIV class=WordSection1>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Calibri','sans-serif'; COLOR: #1f497d; FONT-SIZE: 11pt">Hi
Kevin:<o:p></o:p></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Calibri','sans-serif'; COLOR: #1f497d; FONT-SIZE: 11pt"><o:p> </o:p></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Calibri','sans-serif'; COLOR: #1f497d; FONT-SIZE: 11pt">A
loaded diesel can easily run egt of 550-650C. Pyrometers are common on big
diesels but it does depend on where the measurement is taken.
<o:p></o:p></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Calibri','sans-serif'; COLOR: #1f497d; FONT-SIZE: 11pt"><o:p> </o:p></SPAN></P>
<DIV>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: #1f497d; FONT-SIZE: 8pt">Phil
Marsh<o:p></o:p></SPAN></B></P>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: #1f497d; FONT-SIZE: 8pt">Marshbros.<o:p></o:p></SPAN></B></P>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: #1f497d; FONT-SIZE: 8pt">250
569-7858<o:p></o:p></SPAN></B></P></DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Calibri','sans-serif'; COLOR: #1f497d; FONT-SIZE: 11pt"><o:p> </o:p></SPAN></P>
<DIV>
<DIV
style="BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; PADDING-BOTTOM: 0cm; PADDING-LEFT: 0cm; PADDING-RIGHT: 0cm; BORDER-TOP: #b5c4df 1pt solid; BORDER-RIGHT: medium none; PADDING-TOP: 3pt">
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Tahoma','sans-serif'; FONT-SIZE: 10pt"
lang=EN-US>From:</SPAN></B><SPAN
style="FONT-FAMILY: 'Tahoma','sans-serif'; FONT-SIZE: 10pt" lang=EN-US>
Gasification [mailto:gasification-bounces@lists.bioenergylists.org] <B>On
Behalf Of </B>Kevin<BR><B>Sent:</B> November-28-13 12:27 PM<BR><B>To:</B>
Discussion of biomass pyrolysis and gasification<BR><B>Subject:</B> Re:
[Gasification] Fluidised Bed Reactor<o:p></o:p></SPAN></P></DIV></DIV>
<P class=MsoNormal><o:p> </o:p></P>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">Dear GF</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<BLOCKQUOTE
style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0cm; MARGIN: 5pt 0cm 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0cm; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0cm">
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">-----
Original Message ----- <o:p></o:p></SPAN></P></DIV>
<DIV>
<P style="BACKGROUND: #e4e4e4" class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">From:</SPAN></B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <A
title=mailto:GFWHELL@aol.com
href="mailto:GFWHELL@aol.com">GFWHELL@aol.com</A>
<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">To:</SPAN></B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <A
title=mailto:gasification@lists.bioenergylists.org
href="mailto:gasification@lists.bioenergylists.org">gasification@lists.bioenergylists.org</A>
<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">Sent:</SPAN></B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">
Thursday, November 28, 2013 11:51 AM<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">Subject:</SPAN></B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">
Re: [Gasification] Fluidised Bed Reactor<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p> </o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">Kevin
.<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">What
sort of reaction could be expected if we applied the high temperature
exhaust from an IC engine into a "reactor" containing biomass and at the
same time reheated the "reactor" using some of the volatile vapors so
produced? <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black"># My understanding
of exhaust twemperatures is that they run something as follows: (Anyone who
knows better, please correct me:):</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">
Unloaded
Loaded</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">Diesel
~300F=150C
~ 752 F =400C
Max</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">Spark.
Ig: ~500F=260C
~752 F =400C Max</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">I conclude that even
"hot engine exhaust would not be sufficient to operate the C + CO2 -->
2Co reaction that requires temperatures in excess of 700C to
run.</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">perhaps
we could also ionize the vapors produced within the reactor to above
5000 deg. which should yield a relatively low tar stream of gas .some
of which could fuel the IC engine.<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black"># 5000 F would
certainly run the above reaction. However, "Tars" areof the general formula
CxHyOn. Such temperatures would certainly "partially crack" the tars, but
probably would not "crack" them fully, to give a tar free gas. I am guessing
you would end up with some CO, and some other tars of a different
composition. However, they would likely be "heavier tars" that might be
removed more easily.</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black"># The other issue is
the energy required to "ionize" stuff at 5,000 degrees. </SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">This
does not compromise the laws of Thermodynamics.<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black"># Exactly! Although
many have tried, I don't know of any who have succeeded.</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">Best
wishes,</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black">Kevin</SPAN><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"><o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">GF<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt"> <o:p></o:p></SPAN></P></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">In
a message dated 11/28/2013 9:55:19 A.M. Eastern Standard Time, <A
title=mailto:kchisholm@ca.inter.net
href="mailto:kchisholm@ca.inter.net">kchisholm@ca.inter.net</A>
writes:<o:p></o:p></SPAN></P></DIV>
<BLOCKQUOTE
style="BORDER-BOTTOM: medium none; BORDER-LEFT: blue 1.5pt solid; PADDING-BOTTOM: 0cm; MARGIN-TOP: 5pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0cm; MARGIN-BOTTOM: 5pt; MARGIN-LEFT: 3.75pt; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0cm">
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">Dear
Dan<BR><BR>Quoting <A title=mailto:Carefreeland@aol.com
href="mailto:Carefreeland@aol.com">Carefreeland@aol.com</A>:<BR><BR>>
Doug and all,<BR>> Would some sort of a high temp
molecular cracker be a good companion<BR>> to create a quality
gas from a fluidised bed? Possibly some steam and / or<BR>>
preheated air .involved? Seems if you wrapped the exhaust back
through the<BR>> hottest part of the flame in a reactor tube this can
be accomplished.<BR>> Sorry but I have been
kinda outta the loop for a while.<BR><BR># Start by appreciating the
two Fundamental Rules of Thermodynamics <BR>and Thermo
Chemistry:<BR>Fundamental Rule #1: You can't get something for
nothing<BR>Fundamental Rule #2: As a matter of fact, you can't even break
even.<BR><BR>For example, the reaction<BR>C + O2 --> CO2
(`1)<BR>is strongly exothermic, and
gives off about 14,000 BTU per pound of <BR>carbon that is
oxidized.<BR><BR>If there was insufficient O2, and the C was only burned
to CO, as follows:<BR>C + 1/2O2 --> CO
(2)<BR>then only abut 4,000 BTU would be released per
pound of carbon.<BR><BR>If we wanted to reverse reaction #1, we would have
to put back 14,000 BTU/Lb C<BR>OR, in the case of a gasifier, where the
reaction<BR>CO2 + C --> 2 CO
(3)<BR>is desired, we would have to "put back" energy as
follows:<BR>14,000 + 0 --> 2x4,000 + "X"<BR>14,000 --> 8,000 +
"X"<BR>and it is obvious that "X" is 6,000 BTU, in order to respect
<BR>Fundamental Rule #1<BR><BR>"Molecular Crackers" and "Catalysts" do
indeed work, but only when the <BR>fundamental need to add or remove
energy from a reaction is respected. <BR>As long as the "fundamental
need for an energy balance" is respected, <BR>then many things are
possible.<BR><BR>Best wishes,<BR><BR>Kevin<BR><BR>><BR>>
Dan
Dimiduk<BR><BR><BR><BR><BR>_______________________________________________<BR>Gasification
mailing list<BR><BR>to Send a Message to the list, use the email
address<BR><A title=mailto:Gasification@bioenergylists.org
href="mailto:Gasification@bioenergylists.org">Gasification@bioenergylists.org</A><BR><BR>to
UNSUBSCRIBE or Change your List Settings use the web page<BR><A
title=http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
href="http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org</A><BR><BR>for
more Gasifiers, News and Information see our web site:<BR><A
title=http://gasifiers.bioenergylists.org/
href="http://gasifiers.bioenergylists.org/">http://gasifiers.bioenergylists.org/</A><o:p></o:p></SPAN></P></BLOCKQUOTE></DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">
<HR align=center SIZE=2 width="100%">
</SPAN></DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: black; FONT-SIZE: 10pt">_______________________________________________<BR>Gasification
mailing list<BR><BR>to Send a Message to the list, use the email
address<BR><A title=mailto:Gasification@bioenergylists.org
href="mailto:Gasification@bioenergylists.org">Gasification@bioenergylists.org</A><BR><BR>to
UNSUBSCRIBE or Change your List Settings use the web page<BR><A
title=http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
href="http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org</A><BR><BR>for
more Gasifiers, News and Information see our web site:<BR><A
title=http://gasifiers.bioenergylists.org/
href="http://gasifiers.bioenergylists.org/">http://gasifiers.bioenergylists.org/</A><o:p></o:p></SPAN></P></BLOCKQUOTE></DIV><BR><BR>_______________________________________________<BR>Gasification
mailing list<BR><BR>to Send a Message to the list, use the email
address<BR>Gasification@bioenergylists.org<BR><BR>to UNSUBSCRIBE or Change
your List Settings use the web
page<BR>http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org<BR><BR>for
more Gasifiers, News and Information see our web
site:<BR>http://gasifiers.bioenergylists.org/<BR></FONT></BLOCKQUOTE></DIV></FONT></BODY></HTML>