[Greenbuilding] Insulation fasteners
Sacie Lambertson
sacie.lambertson at gmail.com
Wed Nov 14 09:32:29 CST 2012
How about gluing the layers together? We glued foam to concrete walls
where necessary. It worked well. Nice and tight. As for how you might
put whatever on top of that, again, glue (foam) might be your solution if
it is drywall. Sacie
On Wed, Nov 14, 2012 at 7:07 AM, <bill.allen at verizon.net> wrote:
> Hi,
> I am in the process of putting rigid insulation on an out building. I am
> installing 2 layers of 2" styrofoam. I found 3" "nails" (very thin with
> plastic washers to hold the foam) but am having trouble finding fasteners
> for the next layer....I'm figuring 6" (2x2"foam+1"sheathing + 1" in the
> stud).
> Any suggestions would be greatly appreciated. Regular nails that big are
> WAY too expensive.
> I will also need a fastener (maybe a screw?) for the next layer...the
> occasional nailer that will hold the siding. What do people use?
> Thanks,
> Bill
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
>
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20121114/cd27270c/attachment.html>
More information about the Greenbuilding
mailing list