[Greenbuilding] voluminous wall cavities - limits to what one can reasonably dense pack with a cellulose blower?
RT
archilogic at yahoo.ca
Sat Jun 22 10:51:03 CDT 2013
On Sat, 22 Jun 2013 11:16:32 -0400, Sam Ewbank <g.l.ewbank at gmail.com>
wrote:
> Would a 2x4 interior load bearing wall be sufficient? That would create a
> gap of 3 1/4 inches between the interior and exterior walls.
Actually, a 2x4 @16" o/c bearing wall + 2x3 @ 24" o/c curtain wall would
be more than sufficient and the gap between the two could easily be made
to be 3.5" (ie to accommodate a later of 4" batts) or 5.5" ( to
accommodate 6" batts) or 7" (ie 2 layers of 4" batts laid perpendicular to
each other) etc.
I assumed that Reuben was restricted to 2x6 because of a retro-fit of
as-built walls but not sure why to the 10.25" wall thickness.
--
=== * ===
Rob Tom AOD257
Kanata, Ontario, Canada
< A r c h i L o g i c at Y a h o o dot c a >
(manually winnow the chaff from my edress if you hit "reply")
More information about the Greenbuilding
mailing list