[Greenbuilding] Passive solar home--concrete overlay re thermal mass
Topher
topher at greenfret.com
Mon May 13 09:38:47 CDT 2013
On 5/13/2013 1:07 AM, KTOT (g) wrote:
> Does anyone have experience or knowledge about this? Using or not
> using a concrete overlay product for the top layer of a floor for
> thermal mass, vs. a plain darkly stained concrete slab
A concrete overlay product is likely to be roughly similar in thermal
characteristics to a concrete slab. Meaning that you will just have a
thicker thermal mass. It seems unlikely that you should be worried
about /too much/ thermal mass in a passive solar house. The overlay
product might have a lower specific heat, or conductivity, wither of
which will reduce it's effectiveness somewhat. Remember to stick with a
dark color.
Thank You Kindly,
Corwyn
--
Topher Belknap
Green Fret Consulting
Kermit didn't know the half of it...
http://www.GreenFret.com/
topher at greenfret.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20130513/54ce3e15/attachment.html>
More information about the Greenbuilding
mailing list