[Greenbuilding] Bonding Veneer Plywood to EPS Foam

[Tim Brown]

Silicon or   construction  adhesive
On Mar 19, 2014, at 1:15 PM, conservationarchitect at rockbridge.net wrote:

> I am interested in bonding a veneer grade plywood to a 3" or thicker eps foam to create a panel that could go to the interior of a conventionally wood framed structure, where the stud cavity is left outside the thermal envelope to provide a ventilation and drain plain.  The panel could primarily be self supporting and could give an attractive finish, depending on the plywood panel selected.  By locating to the interior side of the structure, we can achieve continuity.
> 
> Can people on the list recommend a glue suitable for bonding plywood to foam that would not need mechanical fasteners?  In some ways this is similar to a structural insualted panel (SIP) or Structural Insulated Sheathing (SIS).
> 
> Input appreciated.
> 
> Eli 
> 
> 
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org