[Greenbuilding] finally found some mesh/netting/fabric

Reuben Deumling 9watts at gmail.com
Tue Dec 13 13:38:14 CST 2016


Yeah that is actually very much like what I have.
It is called BIBS (Blown In Blanket System).
Cute.

So how would you propose gluing it?
1) apply glue to bank of studs with roller;
2) unfurl and staple precut section of mesh to studs?

Or something else?

On Tue, Dec 13, 2016 at 11:29 AM, mrgoodbeer at juno.com <mrgoodbeer at juno.com>
wrote:

> Not sure what stuff you are referring to, but it brought to mind the idea
> of horticultural floating row cover or frost blanket. It comes in various
> weights and roll sizes. It should be easy to glue to studs and poke holes
> where you need to.
>
> ---------- Original Message ----------
> From: Reuben Deumling <9watts at gmail.com>
> To: Greenbuilding <greenbuilding at lists.bioenergylists.org>
> Subject: [Greenbuilding] finally found some mesh/netting/fabric
> Date: Tue, 13 Dec 2016 11:03:40 -0800
>
> to stretch over open stud bays before blowing cellulose into them. My
> question for the brain trust is how you keep this stuff snug up against the
> studs, so no cellulose can force itself between the mesh and the studs,
> which would interfere with subsequent attempts to hang drywall?
> On the stuff I used previously (I think it was recommended by someone
> here) the hole size was 1/4" square and I stapled it to the studs and then
> rolled glue up and down the stud faces *through* the holes. That method
> worked o.k. But this stuff is more like a hospital gown. I wonder if the
> glue would work its way through the tiny holes to adhere the stuff to the
> stud faces?
> I'm open to all suggestions.
> Mostly I'm looking forward to a lot less blowback with this stuff!
>
> Thanks.
>
>
> ____________________________________________________________
> *You Won't Believe What Producers Hid About Mary Ann*
> trend-chaser.com
> <http://thirdpartyoffers.juno.com/TGL3132/58504c2714864c2669fast02duc>
> http://thirdpartyoffers.juno.com/TGL3132/58504c2714864c2669fast02duc
> [image: SponsoredBy Content.Ad]
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.
> bioenergylists.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20161213/d0db1b27/attachment.html>


More information about the Greenbuilding mailing list