[Greenbuilding] ≤ 24" vented range hoods?

[Clarke Olsen]

I built an exhaust out of a unit from a tag sale, using a piece of "Smoked Chrome" un-backed laminate, from Chem-metal, 
for the shell.
Clarke Olsen
clarkeolsendesign.com
373 route 203
Spencertown, NY 12165 
USA
518-392-4640
colsen at taconic.net




On Dec 16, 2017, at 5:53 PM, Reuben Deumling <9watts at gmail.com> wrote:

> Another related question: 
> It seems that as with many products this market is rather unevenly stocked. Below 30" the choices shrink dramatically, and Energy Star models are (surprise!) clustered up in the pricey end of the spectrum. 
> 
> Are there perchance any small, reasonably priced, energy miserly vent hoods I haven't found? Of course, our kitchen stove is a mere 20" wide, so the narrower the better...
> 
> For that matter, how complicated are these appliances? Can I buy the guts or a drop in unit out of which to make a DIY vent hood?
> 
> Thanks!
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20171217/f5e7353c/attachment.html>