[Greenbuilding] ≤ 24" vented range hoods?

[Joe Killian]

Reuben,

   These days LED light bulbs are made to replace incandescent in 
virtually every shape and voltage.  Living off-grid, we've gone to 100% 
LED in all sorts of fixtures.  One source I've used for some of the 
less-common bases/voltages is ledlight.com.

Joe


On 12/17/2017 8:18 AM, Reuben Deumling wrote:
> Thanks, Alan.
>
> That looks like a serious contender. I note the (2) 50W halogen 
> lights, and assume one could swap in something a bit more modest 
> (LEDs?) with some fiddling. I've done plenty of wiring but don't have 
> much experience swapping lights on appliances like this where getting 
> the bezels and related hardware to fit is going to be pretty important.
>
> On Sun, Dec 17, 2017 at 8:06 AM, Alan Abrams 
> <alan at abramsdesignbuild.com <mailto:alan at abramsdesignbuild.com>> wrote:
>
>     https://www.build.com/air-king-sev24ab/s705884?uid=1884350&source=gg-gba-pla_1884350!c671739570!a35699070233!dc!ng&cvosrc=pla.google.1884350&cvo_cid=671739570&cvo_crid144908307322=&=&cvo_adgroup=35699070233&cvo_uniqueid=1884350&gclid=Cj0KCQiAyNjRBRCpARIsAPDBnn2xwT_XjzQAu9zK68Fb-S_CWO-pUhGuk0yJYjLoHw999GtuzaeHwb4aAhg2EALw_wcB
>     <https://www.build.com/air-king-sev24ab/s705884?uid=1884350&source=gg-gba-pla_1884350%21c671739570%21a35699070233%21dc%21ng&cvosrc=pla.google.1884350&cvo_cid=671739570&cvo_crid144908307322=&=&cvo_adgroup=35699070233&cvo_uniqueid=1884350&gclid=Cj0KCQiAyNjRBRCpARIsAPDBnn2xwT_XjzQAu9zK68Fb-S_CWO-pUhGuk0yJYjLoHw999GtuzaeHwb4aAhg2EALw_wcB>
>
>
>     Alan Abrams, CPBD, AIBD*
>     */Associate Designer Helicon Works Architects
>     <http://www.heliconworksarchitects.com/>/
>     /Certified Professional Building Designer, American Institute of
>     Building Design <http://aibd.org/> /
>     /President, National Council of Building Designer Certification
>     <http://ncbdc.com/>
>     /
>     cell 202-437-8583 <tel:%28202%29%20437-8583>
>     alan at abramsdesignbuild.com <mailto:alan at abramsdesignbuild.com>
>
>
>
>
>
>     On Sun, Dec 17, 2017 at 10:28 AM, Clarke Olsen
>     <colsen at fairpoint.net <mailto:colsen at fairpoint.net>> wrote:
>
>         I built an exhaust out of a unit from a tag sale, using a
>         piece of "Smoked Chrome" un-backed laminate, from Chem-metal,
>         for the shell.
>         Clarke Olsen
>         clarkeolsendesign.com <http://clarkeolsendesign.com>
>         373 route 203
>         Spencertown, NY 12165
>         USA
>         518-392-4640 <tel:%28518%29%20392-4640>
>         colsen at taconic.net <mailto:colsen at taconic.net>
>
>
>
>
>         On Dec 16, 2017, at 5:53 PM, Reuben Deumling <9watts at gmail.com
>         <mailto:9watts at gmail.com>> wrote:
>
>>         Another related question:
>>         It seems that as with many products this market is rather
>>         unevenly stocked. Below 30" the choices shrink dramatically,
>>         and Energy Star models are (surprise!) clustered up in the
>>         pricey end of the spectrum.
>>
>>         Are there perchance any small, reasonably priced, energy
>>         miserly vent hoods I haven't found? Of course, our kitchen
>>         stove is a mere 20" wide, so the narrower the better...
>>
>>         For that matter, how complicated are these appliances? Can I
>>         buy the guts or a drop in unit out of which to make a DIY
>>         vent hood?
>>
>>         Thanks!
>>         _______________________________________________
>>         Greenbuilding mailing list
>>         to Send a Message to the list, use the email address
>>         Greenbuilding at bioenergylists.org
>>         <mailto:Greenbuilding at bioenergylists.org>
>>
>>         to UNSUBSCRIBE or Change your List Settings use the web page
>>         http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org
>>         <http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org>
>
>
>         _______________________________________________
>         Greenbuilding mailing list
>         to Send a Message to the list, use the email address
>         Greenbuilding at bioenergylists.org
>         <mailto:Greenbuilding at bioenergylists.org>
>
>         to UNSUBSCRIBE or Change your List Settings use the web page
>         http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org
>         <http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org>
>
>
>
>     _______________________________________________
>     Greenbuilding mailing list
>     to Send a Message to the list, use the email address
>     Greenbuilding at bioenergylists.org
>     <mailto:Greenbuilding at bioenergylists.org>
>
>     to UNSUBSCRIBE or Change your List Settings use the web page
>     http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org
>     <http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org>
>
>
>
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20171217/48e24739/attachment.html>