[Greenbuilding] Painting Old Steel Shower Enclosure

[Lynelle Hamilton]

Can you get Sansin coatings in Cal? Low VOC and durable. They're made in 
Ontario, so I'm not certain about availability.

Lynelle


On 2017-02-16 1:40 PM, Antonioli Dan wrote:
> I’m renovating a bathroom that has an older, smaller steel shower enclosure that’s no longer made. It needs to have the old paint (epoxy) stripped off it and a few spots of rust sanded. After that it needs to be painted, but with what? In California you used to be able to buy a two-part epoxy, which I’ve never used, but is now phased out due to air quality standards. People are recommending having it sand-blasted and powder coated, using automotive or marine paint, and a few other not very “green” coating solutions. I really worry about the off-gassing of these products, especially if you’re in a hot shower where the potential for off-gassing is increased.
>
> I don’t know of any “green” shower paint products. Any leads or products/solutions?
>
> Dan Antonioli
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20170217/b9f150bb/attachment.html>