it seems better to take the exhaust leg out the long way.  This is because of the inefficiency of any unit, the delta between exhaust air and indoor air temp will be less than the delta between intake and indoor temp.<br><br>
it may also be worthwhile to analyze the diameter of the ducts, as they impact static pressure and particularly noise.  it's notable that as envelope insulation improves, the perception of mechanical noise can increase.<br>
<br> <br clear="all"><b style="color: rgb(0, 102, 0);">Alan Abrams</b><b style="color: rgb(0, 102, 0);"><br>Abrams Design Build LLC</b><br style="color: rgb(0, 102, 0);"><i style="color: rgb(0, 102, 0);">A sustainable approach to beautiful space</i><br style="color: rgb(0, 102, 0);">
<font style="color: rgb(0, 102, 0);" size="1"><a style="color: rgb(51, 51, 255);" href="mailto:alan@abramsdesignbuild.com" target="_blank">alan@abramsdesignbuild.com</a><br style="color: rgb(51, 51, 255);"><a style="color: rgb(51, 51, 255);" href="http://www.abramsdesignbuild.com" target="_blank">www.abramsdesignbuild.com</a><br>
<font size="2"><b>202-726-5894 o<br>202-437-8583 c<br>202-291-0626 f</b></font></font><br><br><div class="gmail_quote"><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">

><br>
> I have an L shaped 36’x26’house with long leg 10’wide and short leg<br>
> 24’wide.  I am looking at installing HRV near north wall in area common to<br>
> both legs so a straight 4” duct can deliver fresh air to opposite side of<br>
> each leg.  A parallel duct on one of the legs would deliver exhaust air to<br>
> South side for plenty of separation between inlet and outlet.  Is there a<br>
> disadvantage for having the exhaust duct going 20’ through conditioned<br>
> space?  Would it be advantage to have the long leg be the outdoor air supply<br>
> instead.  I could send exhaust air out North side near inlet, but then<br>
> continue to open end to achieve the separation needed instead of crossing<br>
> the house.  I would like to use PVC pipe to insure tightness.<br>
><br></blockquote></div><br>