This is a rather specific question, but since there are so many tinkerers on these three lists I figured it wouldn't hurt to ask. We are going to be getting a chest freezer--it goes against my better judgment to add a kWh-sucking appliance to the list, but I didn't get a vote on this one. But I digress. I've had good luck adding rigid foam insulation panels to the exterior of our refrigerator--it makes do with about 125-150 kWh/yr--and I would like to imagine doing something similar to the yet-to-be-purchased chest freezer. The trouble is, I don't think any current chest freezers, and I'm looking at ones that are rated to use <300 kWh/yr, have the coils mounted externally. <br>

Question 1: are any of you aware of a chest freezer I could buy today with visible/external coils?<br>Question 2: on the assumption that the answer to question 1 is no, is it reasonable to assume that (a) I might find the coils by feeling for warm spots once it is plugged in and running?, and (b) what are the chances that the coils will be confined to one of the four walls?<br>
Question 3: If in fact I do find the coils and they are confined to one wall, am I inviting all sorts of trouble if I try to gain access to them (cut the external sheetmetal which I expect will be fused to the foam.....) with the intent of gently adjusting things so that I could squeeze some additional panel of insulation between the now visible coils and the interior of the freezer?<br>
<br>Any and all suggestions are appreciated.<br><br>The freezer is likely to live in our basement. In the long run I expect I'll try to carve out a dry space for it under our back porch to more fully take advantage of the cooler outdoor temperatures.<br>
<br><br>Thanks everyone.<br><br>Reuben Deumling<br>
<br>