Interesting-thanks for the calculation, Corwyn. <br>So if I run this another way, I find that I can raise the temperature of 10 gal of water by 60F (from 45F to 105F) with 0.125 lbs (2 oz) of wood. That seems fishy. <br>I wonder if what we're neglecting here is that the fraction of the usable heat generated by the wood burning (60% here), only xy% is actually entering the coil of copper tubing. If that fraction is, say, 1% then the amount of wood required would be 100x more or 12.5lbs of wood. That strikes me as a more realistic figure. Anyone care to comment?<br>
<br>A (water heater) pilot light is typically 400BTU/hr. I know that over the course of 24 hours I can heat 20 gal of water in my water heater (not sure by how much, but by this calculation--again assuming 60% efficiency it would be 35F)<br>
9,600 BTU * 60% efficiency of system = 5,760 BTU<br>divided by 166 lbs of water = 35<br><br>Lots of BTUs in that stick of firewood!<br><br><div class="gmail_quote">On Wed, Nov 9, 2011 at 10:02 AM, Corwyn <span dir="ltr"><<a href="mailto:corwyn@midcoast.com">corwyn@midcoast.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div><div></div><div class="h5"><br></div></div>
20 lbs of wood @ 8,000 BTUs per pound = 160,000 BTUs.<br>
times efficiency of the system (e.g. 60%) = 96,000 BTUs.<br>
divided by 10 gallons of water * 8.3 lbs per gallon = 1,156 degrees F rise.<br>
<br>
Alternatively, 96,000 BTUs divided by (say) 60 degree temperature rise = 1,600 gallons of water<br></blockquote><div> </div></div>