Recently installed three triac thermostats in an all-baseboard townhouse: rec-room/basement, living room, master bedroom. The owner is very pleased with the results. Very accurate temperature control; no wild swings above and below the set point. The thermostats output just enough wattage to match the heat loss. A normal thermostat is just a switch, either on or off. Normal watt-density for baseboards is 250 watts/foot. With the triac, watt-density can be reduced to less than 50 watts/foot. Like heat pumps with inverter technology, the object is to run the appliance at the lowest power level, continuously; this makes for a very low demand on the grid. One of the many benefits is that it virtually eliminates "cold wall effect", because the baseboards are not cycling on and off.<div>
<br></div><div>This is a great upgrade solution (interim or until the money comes in for the heat pump!) for anyone with baseboards. Just might breathe new life into a heating method that many have not considered, especially in well insulated homes. </div>
<div><br></div><div><a href="http://www.aubetech.com/support/faq.php?noLangue=2#TRIAC">http://www.aubetech.com/support/faq.php?noLangue=2#TRIAC</a></div><div><br></div><div>Richard</div><div><br></div><div><br></div>