I've corresponded with John Gulland and discovered his antipathy toward flue gas thermometers. To each his own. I love mine; wouldn't want to be without it for anything. <br><br>Then I came across this passage on his site:<br>
"For most of the time a wood stove is operating, its flue gas temperature
 is either rising or falling. Anyone who says that you should aim for a 
particular flue gas temperature or even a range in temperature is 
<u>setting you up for failure because steady-state burning is almost 
impossible to achieve.</u>"<br><br>I found this surprising, because the way I heat (which, admittedly, is toward the active end of the spectrum) I am able to keep the flue gas temperature in a fairly tight band around 600F once it has come up to temperature, so for an hour and a half to two hours. Firewood split small helps this immensely. Adding a piece at just the right time, pulling the pieces inside the firebox the front ends of which have burned,  and adjusting the vent allows me to keep that temperature steady. <br>
<br>I'd even go one step further and argue that it is the presence of the flue gas thermometer which allowed me to achieve the 'almost impossible.' It seems pretty clear that John Gulland doesn't use such a thermometer, and he obviously has discovered ways to heat that yield the results he is satisfied with, and for all I know they are as good or better than mine. But my point is that having the thermometer on hand, reading it a lot, teaches you what combination of firewood size, loading frequency, and vent adjustment will yield this steady state burn condition. <br>
<br>To me the flue gas thermometer is akin to the tachometer in a car. Sure you can and most of us probably have driven without one, but once you have one and pay attention to is you can learn how to drive in a band close to the desired rpm. <br>
Gulland's statement above suggests to me that he drives by listening to the engine. Fine. But don't discourage others from buying and installing a tachometer by arguing that it is almost impossible to hold steady at those rpms....<br>
<br>As for the relationship between flue gas temperature and the conditions in the firebox... well, I'm all ears. <br>