some thoughts:<br><br>a well insulated slab in a well insulated house (waddever that might be) will be room temperature-ie, reasonably comfortable all by itself.  <br><br>conversely, to do a heated slab in a well insulated house means that the slab could not be heated too much to begin with, without overheating the space--given its typical area relative to the envelope.<br>

<br>further--given that modulating the temp of a slab--to respond to sudden changes, say, in ambient conditions--or a lot of cooking for a house party, etc-- is a sluggish affair with any radiant floor system--not to mention the risk of contamination in ducts that cannot be accessed without a 90# pavement breaker--I'd forgo the radiant floor and lay floating cork over the slab (which is as comfortable a floor you can have, IMO), and pocket the difference.<br>

<br>
AA<br><br><div class="gmail_quote">On Sat, May 19, 2012 at 2:02 PM, RT <span dir="ltr"><<a href="mailto:archilogic@yahoo.ca" target="_blank">archilogic@yahoo.ca</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<br>
And while I'm here, and for the same reason (quiet list) I thought I'd toss the following  out for comment.<br>
<br>
In my immediate neighbourhood there two expanded polystyrene (EPS) insulating concrete form (ICF) homes (one built two years ago, one currently being built) that chose to use heated air rather than hydronics to heat the slab-on-grade floor.<br>


<br>
They both use closely-spaced runs (24" o/c or less ?) of small diameter (4 inch ? or less ) sheet metal ducts embedded in the concrete.<br>
<br>
Me ? I think that it's a dumb idea for a number of reasons but it'd be interesting to hear from others what they think , pro or con.<br>
<br>
<br>
-- <br>
=== * ===                                                                                       AOD257<br>
Rob Tom<br>
Kanata, Ontario, Canada<br>
<br>
< A r c h i L o g i c  at  Y a h o o  dot  c a  ><br>
(manually winnow the chaff from my edress if you hit "reply")<br>
<br>
______________________________<u></u>_________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org" target="_blank">Greenbuilding@bioenergylists.<u></u>org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.<u></u>org/mailman/listinfo/<u></u>greenbuilding_lists.<u></u>bioenergylists.org</a><br>


</blockquote></div><br>