Thanks, John. That is wonderfully detailed. I shall ponder this and see how much of that I can do here. When I get closer I'm sure I'll have another question or two. <br><br><div class="gmail_quote">On Mon, Dec 10, 2012 at 10:21 PM, John Salmen <span dir="ltr"><<a href="mailto:terrain@shaw.ca" target="_blank">terrain@shaw.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div link="blue" vlink="purple" lang="EN-CA"><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Any mechanical connection (screws, nails) transmits sound – also anything rigid (sleepers, framing blocking, plumbing etc.) so you are best off floating the next floor assembly and building on top of it (as is done commercially). <u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">What you are trying to do is convert sound energy into heat basically. So materials that absorb and reduce the transfer of sound by interfering with it (reducing vibration). Layers of dissimilar material can work much better. Initially I would look at something like a cork layer adhered to the hemlock decking with acoustic sealant and then a layer of foam adhered with acoustic sealant to the cork followed by a layer of drywall (cheap and the weight holds down the foam and cork. I would then laminate ¾ sheathing to that with acoustic sealant – I might even consider two layers of thinner particle board sheathing with acoustic sealant between (changing the orientation of the sheets between layers). The acoustic sealant (vapour barrier sealant) is key as it doesn’t ever set or harden so allows each material to float reducing transfer of energy by vibration. <u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">The assembly has to be thick enough to isolate nail penetration of the flooring above which usually sticks through the sheathing by ¼ to ½ “. Floor plates for walls should ideally be glued with minimal nailing or use a gasket – don’t let wall drywall touch the floor (its not just the floor think of the room as a giant speaker – compressing some insul batts along the floor line in walls – anything that can absorb sound from the room before it hits the floor). Edges of the floor sheathing should be isolated from touching the exterior walls. Everything has to float like a boat. The nails through the oak flooring into the sheathing will hold everything in plane.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I would look at the weight of that assembly see if it worked with the floor structure and the budget and then tinker with it. Dissimilar materials in layers that both provide both high density for absorption and low density for isolation.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm 0cm 0cm"><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="EN-US">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="EN-US"> Greenbuilding [mailto:<a href="mailto:greenbuilding-bounces@lists.bioenergylists.org" target="_blank">greenbuilding-bounces@lists.bioenergylists.org</a>] <b>On Behalf Of </b>Reuben Deumling<br>
<b>Sent:</b> December-10-12 5:46 PM<br><b>To:</b> Greenbuilding<br><b>Subject:</b> [Greenbuilding] second floor wood floor over insulation layer - questions<u></u><u></u></span></p></div><div class="im"><p class="MsoNormal">
<u></u> <u></u></p><p class="MsoNormal">I'm going to be remodeling a two-storey house where 1/2 of the upstairs will become a ~ 600 sq ft apartment. To that end I'm planning to add a layer of something  to the floor (in between the existing decking and future finished floor) for both sound and thermal insulation. All that is there now is 2x6 T&G Hemlock decking. I want to install an oak floor above the insulation but have not done this before and am curious to hear your suggestions.<br>
<br>The only thing I've come up with so far is rigid foam with T&G plywood on top screwed through the insulation? <br><br>Thanks very much. <u></u><u></u></p></div></div></div><br>_______________________________________________<br>

Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org">Greenbuilding@bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org</a><br></blockquote>
</div><br>