<div dir="ltr"><div><div><div><div>My interpretation of this very helpful piece on sizing solar thermal DHW systems: <a href="http://www.builditsolar.com/Projects/WaterHeating/DIYsizing.htm">http://www.builditsolar.com/Projects/WaterHeating/DIYsizing.htm</a><br>
</div><div>which takes us here: <br><a href="http://www.azsolarcenter.org/tech-science/solar-for-consumers/solar-hot-water/solar-hot-water-a-primer.html">http://www.azsolarcenter.org/tech-science/solar-for-consumers/solar-hot-water/solar-hot-water-a-primer.html</a><br>
</div><div><i><br>In the Northwest, use 1 square foot of collector per 0.75 gallon (2.8 l) of tank capacity.</i><br><br></div>is that we'd be fine with <b>one </b>4'x8' collector<br><br></div>32 square feet x 0.75gal = 24gal (storage) <br>
<br></div>This system will be for my house, and we are not counting on it to do much of anything in the winter, when our solar insolation (here in Portland, Oregon) is among the worst in the US. The woodstove will be relied on to complement the solar collector in the winter. <br>
<br>I found two decommissioned 4'x8' collectors for cheap, but can't rationalize using both for my system. Any thoughts or experience on real world yield of one-collector systems? <br></div>The fellow I bought these two panels from also happened to mention that they produced too much hot water. Without knowing anything about his and his wife's hot water needs this seemed to confirm my suspicions.<br>
<br>Thanks very much.<br><div><div><br><div><div><div><br><br><br></div></div></div></div></div></div>