<div dir="ltr"><div class="gmail_default" style="font-family:verdana,sans-serif;font-size:small">As an inveterate wood burner, welcome back to the list Norbert; perhaps you've been just lurking, but we welcome your sensible active participation.  Over the years we've been fortunate to have a number of greats on the list, many of whom have moved on for whatever reason, I truly miss all those distinct personalities who could offer a wealth of information or simply make this list fun to read.  It is fine when one of these good people come back.<br>

<br></div><div class="gmail_default" style="font-family:verdana,sans-serif;font-size:small">Sacie<br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Sat, Aug 24, 2013 at 6:27 AM, Norbert Senf <span dir="ltr"><<a href="mailto:mheat@mha-net.org" target="_blank">mheat@mha-net.org</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">A 5 lb piece of wood burned at 70% efficiency gives about 32,000 BTU. That would cover the slab heat loss for 7 days. For a 5 month heating season, it would need 100 lbs of wood. Doubling the foam thickness to R20 would save about 50 lbs of wood per year. At $240 per cord, that's a saving of about $4.00 per year.<br>


<br>
At $1.50/sq ft for the extra foam (not counting labour), 900 sq ft would cost $1350, for a simple payback of 337 years..........N<div><div class="h5"><br>
<br>
<br>
At 05:44 AM 8/24/2013 -0400, you wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
RT <<a href="mailto:archilogic@yahoo.ca" target="_blank">archilogic@yahoo.ca</a>> writes:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
... In putting our pants back on frontwards, someone noticed that we had all received tattoos onto our backsides:<br>
<br>
? ? ? ? ? "? q? =? A [ dT ( K/s + hc ) +? ( ? * T^4 ) ]? "<br>
</blockquote>
<br>
How do you estimate slab heat loss?<br>
<br>
After lots of finite difference network ground loss calculations Professor Kelly Kissock at U Dayton <a href="http://academic.udayton.edu/kissock/http/EEB/Energy%20Efficient%20Buildings_1.htm" target="_blank">http://academic.udayton.edu/<u></u>kissock/http/EEB/Energy%<u></u>20Efficient%20Buildings_1.htm</a> says an A ft^2 slab on US Rf foamboard with Rp vertical perimeter insulation down "to the footer" would have an approximate A(0.1140/(4+Rf+Rp)+0.8768/(16+<u></u>Rp)) Btu/h-F conductance from the room air temp to the 4 meter deep ground temp.<br>


<br>
For example, a 900 ft^2 slab on R10 foamboard with R15 perimeter insulation would have a 900(0.1140/(4+10+15)+0.8768/(<u></u>16+15)) = 29 Btu/h-F conductance from a 65 F room air temp to a 58 F deep ground temp, so the room would lose (65-58)29 = 203 Btu/h to the slab.<br>


<br>
How much would this change with different perimeter insulation depths?<br>
<br>
Nick<br>
<br>
______________________________<u></u>_________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org" target="_blank">Greenbuilding@bioenergylists.<u></u>org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.<u></u>org/mailman/listinfo/<u></u>greenbuilding_lists.<u></u>bioenergylists.org</a><br>


</blockquote>
<br></div></div>
------------------------------<u></u>-------------<br>
Norbert Senf---------- mheat(at)<a href="http://heatkit.com" target="_blank">heatkit.com</a><br>
Masonry Stove Builders<br>
25 Brouse Rd.<br>
RR 5, Shawville------- <a href="http://www.heatkit.com" target="_blank">www.heatkit.com</a><br>
Québec J0X 2Y0-------- fax:-----<a href="tel:819.647.6082" value="+18196476082" target="_blank">819.647.6082</a><br>
---------------------- voice:---<a href="tel:819.647.5092" value="+18196475092" target="_blank">819.647.5092</a><div class="HOEnZb"><div class="h5"><br>
<br>
<br>
<br>
<br>
<br>
<br>
______________________________<u></u>_________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org" target="_blank">Greenbuilding@bioenergylists.<u></u>org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.<u></u>org/mailman/listinfo/<u></u>greenbuilding_lists.<u></u>bioenergylists.org</a><br>


</div></div></blockquote></div><br></div>