<div dir="ltr"><div>I'm remodeling a house that recently had a metal roof installed. The roofers cut the top 3" of sheeting at both sides of the ridge and stapled some mesh over the opening and installed vented ridge flashing above. Some of the attic was already vaulted. I'm expanding the amount that is vaulted. The tempting and easy thing is to replace those removed strips of plywood, caulk the seams and insulate from below. But I'm well aware that the venting beneath roof planes is done with some forethought. I'm keen to achieve a sealed envelope to keep bugs and drafts out primarily. I've run across (pictures of) a product that is installed behind/above batts in rafter bays that allows air to pass between the fiberglass and the underside of the plywood. Are these still a good idea? Other thoughts on how I might proceed? What physical phenomenon is the venting meant to prevent?<br>
<br>Thanks very much.  <br></div><br></div>