<div dir="ltr"><div>I'm working on a house that has a standing seam metal roof. I'm adding a shallow roof section above the gable windows on the weather sides to protect them from the weather and to provide some first order shielding from the fierce afternoon sun in the summer. I'll be copying the pitch and roof material of the rest of the house. Then I started wondering whether for a 20" roof (distance from ridge = housewall to soffit) I couldn't just as easily use a single strip of metal running horizontally, with a 3/4" lip at the top to slip under the course of wood siding, and a ~2" lip at the bottom, like that soffit metal has? The chief reason to do this at least as I think about it would be to simplify the ridge flashing, which with a standing seam meeting wooden siding at a 9in12 pitch requires notching either the roofing or the siding plus caulk. I've done this before and it works o.k. but it is a bunch of work and not entirely satisfactory. <br>
<br></div>This additional roof section would look a lot nicer with a hip at each end, which means I'd need to figure out some way to integrate the ridge cap into the wall, or, since it is all outside the envelope perhaps I'm overthinking this?<br>
<div><br>Thoughts? Suggestions?<br></div></div>