<div dir="ltr">hmmm, what comes into play is resistance to wind pressure. Of course, the original structure did not have a plywood roof diaphragm, and held up for 88 years. But if you were building this from scratch, you would have to account for this, particularly if you're in a high wind zone. It would be less of a concern if there are meaty masonry gable ends, but if not, I'd opt for a minimal layer of plywood applied to the rafters. 3-ply 3/8" should do it.<div><br></div><div>-AA</div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature"><div dir="ltr"><font><font><span style="color:rgb(102,0,0)">Alan Abrams</span></font><b style="color:rgb(102,0,0)"><br></b><i><span style="color:rgb(102,102,102)">certified professional building designer, AIBD<br>certified passive house consultant, PHIUS</span></i></font><div><i><span style="color:rgb(102,102,102)">certified passive house builder, PHIUS</span></i><font><span style="color:rgb(102,0,0)"><font color="#666666"><i><br></i></font></span></font><font style="color:rgb(102,102,102)" size="1"><font>cell     </font></font><font style="color:rgb(102,102,102)" size="1"><font>202-437-8583</font></font><font style="color:rgb(102,102,102)" size="1"><font><br>
  <a style="color:rgb(102,102,102)" href="mailto:alan@abramsdesignbuild.com" target="_blank">alan@abramsdesignbuild.com</a><br style="color:rgb(102,102,102)"></font></font><a href="http://www.heliconworks.com/index2.html" target="_blank">HELICON WORKS <i>Achitecture and Education</i></a></div></div></div></div>
<br><div class="gmail_quote">On Sun, Dec 7, 2014 at 10:52 AM, Bill Allen <span dir="ltr"><<a href="mailto:bill.allen@verizon.net" target="_blank">bill.allen@verizon.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>Hi all</div><div>I am about to reroof my 1926 colonial and am looking to also insulate per the BSC "deep energy retrofit" plans consisting of plywood sheathing, 2 layers of 2" polyiso, another layer of plywood, then roofing (in my case, standing seam metal roofing).</div><div>The original roof was wooden shingles that are still in place with 2 layers of asphalt on top. Also still in place are the nailers for the wood shingles...roughly 1x2s, 5.5" on center across the rafters.</div><div><br></div><div>My question is: if I leave the 1x2 nailers in place during the demo can i exclude the first layer of plywood and install the polyiso directly on the nailers? It would then have plywood on top, secured with long screws into the rafters. Less material and less cost.</div><div><br></div><div>Thanks for any thoughts/comments.</div><div><br></div><div><br></div>Sent from my cell phone<div></div></div><br>_______________________________________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org">Greenbuilding@bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org</a><br></blockquote></div><br></div>