<div dir="ltr">I am haunted by some crawlspace photos (courtesy of Joe Lstiburek, IIRC) of the bare underside of some floor joists, with insulation in the spaces between, and glistening green tendrils of some unspeakable growth dripping from the bottom edges of the joists.<br><br>this image could of course be a figment of the tormented imagination of a builder who did a whole lot of this kind of stupid shit, before he became so "enlightened," but assuming this recollection is valid, the condition was due to the thermal bridging of the joist itself, providing surfaces at the dewpoint, and air in the crawlspace humid enough to condense on and saturate the exposed bottom of the joists. <br><div class="gmail_extra"><br></div><div class="gmail_extra">suggesting, in such a case--regardless of other measures--a layer of insulation applied to underside of the joists might be a good idea. One approach would be to insulate and air seal the perimeter of the floor cavity, by any means necessary, and apply a permeable air barrier like tyvek, directly under the joists, and then a layer of Roxul to that, supported by furring strips. insulating the floor cavity itself would be optional. Air tight, fire resistant, mold resistant, and able to dry in either direction, after the bathtub overflows, or the washer hose craps out...</div><div class="gmail_extra"><br></div><div class="gmail_extra">-aa</div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature"><div dir="ltr"><font size="2"><font size="2"><span style="color:rgb(102,0,0)">Alan Abrams</span></font><b style="color:rgb(102,0,0)"><br></b><i><span style="color:rgb(102,102,102)">certified professional building designer, AIBD<br>certified passive house consultant, PHIUS</span></i></font><div><i><span style="color:rgb(102,102,102)">certified passive house builder, PHIUS</span></i><font size="2"><span style="color:rgb(102,0,0)"><font color="#666666"><i><br></i></font></span></font><font style="color:rgb(102,102,102)" size="1"><font size="2">cell     </font></font><font style="color:rgb(102,102,102)" size="1"><font size="2">202-437-8583</font></font><font style="color:rgb(102,102,102)" size="1"><font size="2"><br>
  <a style="color:rgb(102,102,102)" href="mailto:alan@abramsdesignbuild.com" target="_blank">alan@abramsdesignbuild.com</a><br style="color:rgb(102,102,102)"></font></font><a href="http://www.heliconworks.com/index2.html" target="_blank">HELICON WORKS <i>Achitecture and Education</i></a></div></div></div></div>
<br><div class="gmail_quote"><br></div></div></div>