<div dir="ltr"><div>A conversation between Frank T and John S reminded me of something I'd been meaning to post here: my recent adventure in over-insulating.<br><br>I recently remodeled* a 2x6-framed two storey house in the Pacific NW of the US (built by my family 30 years ago). Half of the upstairs I turned into a self-contained apartment for my mother. It is about 500 square feet. I added a 2x4 wall on the inside of all the exterior walls and blew in dense pack cellulose, for a total walll thickness of about 11 inches. The interior wall framing does not touch the original exterior wall which still has the original fiberglass batts in it - I left the drywall in place. I lofted the attic and ran horizontal 2x3 furring strips on the inside of the 2x8 rafters attaching them with hurricane clips at the junctions. I reused the original and some new fiberglass batts in two layers perpendicular to each other ~ 11 inch total thickness. The original house had very poor air sealing, and I tried to improve this as best I could. The windows are the original thermopane inward opening casements imported from Germany. I added wood framed storm windows that fit snugly, screens in the summer.  Heat is provided by a small Danish wood stove with a flue-mounted water jacket for domestic hot water. <br><br>However...the heating demand for this space is very nearly zero. The whole house (before this remodel) burned through about 5 cords/winter and it was never really cozy. So far this winter my mom's burned a little over one-tenth of a cord. <br><br></div><div>Reuben<br></div><div><br></div><div>* I know I asked a bunch of questions about this project of you folks along the way. A belated thank you to all. <br><br></div><div><br></div></div>