<div dir="ltr"><div><div><div>There seems to be a tradition of placing these all the way out at exterior walls, and often under windows. Does this hark back to when windows were the coldest surfaces and this would--in combination with a floor vent--make for convective currents which could then be relied on to mix the warm air better? <br></div>I'm in the process of adding four inches to the inside of the exterior walls on a 140 year old farmhouse and blowing a ton of cellulose into those deeper cavities. There will be exterior storm windows and the house overall should end up pretty tight and cozy even without the furnace turned on. I have to move some of these vents as they are too close to the existing wall; my temptation is to shorten the ducts, not just by a few inches but perhaps by a bunch. I'm curious for any thoughts or suggestions you might have. <br><br></div>Thanks very much. <br><br></div>Reuben<br></div>