<div dir="ltr">Hi Paul (or other electrical wizards)-<div><br><div>do you have any experience retrofitting hotel or multifamily corridor lighting with occupancy sensors? For example, what are the code limitations--minimum lighting levels when not actuated, hours of operation, etc...</div></div><div><br></div><div>I've stayed in apartment bldgs in Europe where corridor lights were completely off, all the time, unless actuated. I am also aware that California was considering a mandate for dual level systems a few years ago, with limited hours of operation, but I don't know what became of it. IIRC, they would have required one lumen per square foot, when not actuated.</div><div><br></div><div>-aa</div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><font size="2"><font size="2"><span style="color:rgb(102,0,0)">Alan Abrams</span></font><b style="color:rgb(102,0,0)"><br></b><i><span style="color:rgb(102,102,102)">certified professional building designer, AIBD<br>certified passive house consultant, PHIUS</span></i></font><div><i><span style="color:rgb(102,102,102)">certified passive house builder, PHIUS</span></i><font size="2"><span style="color:rgb(102,0,0)"><font color="#666666"><i><br></i></font></span></font><font style="color:rgb(102,102,102)" size="1"><font size="2">cell     </font></font><font style="color:rgb(102,102,102)" size="1"><font size="2">202-437-8583</font></font><font style="color:rgb(102,102,102)" size="1"><font size="2"><br>
  <a style="color:rgb(102,102,102)" href="mailto:alan@abramsdesignbuild.com" target="_blank">alan@abramsdesignbuild.com</a><br style="color:rgb(102,102,102)"></font></font><a href="http://www.heliconworks.com/index2.html" target="_blank">HELICON WORKS <i>Architecture and Education</i></a></div></div></div></div></div></div>
<br><div class="gmail_quote">On Mon, Apr 18, 2016 at 9:17 PM, Paul M. Eldridge <span dir="ltr"><<a href="mailto:paul.eldridge@ns.sympatico.ca" target="_blank">paul.eldridge@ns.sympatico.ca</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">We've installed over eighty-five thousand Philips Instant FIT lamps over the past two years. These 12-watt T-LEDs are as bright as the 32-watt T8 fluorescents they replace, use one-half as much energy, offer much longer service life and their light quality is noticeably better.  A simple, direct replacement for T8 lamps powered by most any instant-start electronic ballast. <br>
<br>
You can view the retail store that we had upgraded earlier today at: <a href="https://twitter.com/CollieGuy902/status/722219311109115904" rel="noreferrer" target="_blank">https://twitter.com/CollieGuy902/status/722219311109115904</a> (click on the picture to enlarge). <br>
<br>
The lighting load at this location now falls below 12-watts per sq. meter with no loss in light levels. <br>
<br>
Sent via my BlackBerry Q10 | Ce message envoyé avec mon BlackBerry Q10<br>
 <br>
<br>
<br>
_______________________________________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org">Greenbuilding@bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" rel="noreferrer" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org</a><br>
</blockquote></div><br></div>