<html>
  <head>
    <meta content="text/html; charset=windows-1252"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    Hi Joe, <br>
    I'm high enough that a slab will do just fine.  This is a year round
    home, so will insulate to the base of the footings and under the
    slab as you suggest.  I'm planning on running virtually all the
    plumbing through walls (planning a design that has the bath, laundry
    and kitchen water etc in the centre of the home, and around the hot
    water heater/tankless and furnace area.)  The site has town water
    and sewer, so shower drains and those pipes will be in the slab, but
    that's about it. <br>
    <br>
    Thanks!<br>
    <br>
    <div class="moz-cite-prefix">On 2016-04-28 12:34 PM, Joe Killian
      wrote:<br>
    </div>
    <blockquote cite="mid:57223B9E.7060004@sonic.net" type="cite">
      <meta content="text/html; charset=windows-1252"
        http-equiv="Content-Type">
      <div class="moz-cite-prefix">   I hate crawl spaces.  And so will
        you after doing much work in one, even if you don't have to wend
        through many spider webs.  A high water table portends crawl
        space moisture issues too.<br>
           Insulated slab on grade has worked very well for me.  Put
        moisture barrier underneath (Visqueen or equivalent works).<br>
          If it's occupied all year, insulation on the perimeter down to
        the footing is best.  The thermal time constant will be very
        long, but you'll lose few BTU over the long haul.  An insulated
        break (1" foam) between the stemwall and slab as well as
        insulation outside the stemwall works well.<br>
          If it's not occupied year-round, you'll want a shorter thermal
        time constant, so would then want to insulate under the slab -
        again with foam.  Keep the stemwall/footing insulation at the
        perimeter.  Most of you heat loss will be out the sides near the
        surface, whether you have under-slab insulation or not.<br>
        <br>
          I put very minimal pipes in the slab (ground floor drain
        only), and bring all else inside and construct chases for most
        plumbing & electrical.  Protects from freezing better and
        MUCH easier access for any maintenance (& even initial
        installation).<br>
        <br>
        Joe<br>
           <br>
        <br>
        On 4/28/2016 5:44 AM, Norbert Senf wrote:<br>
      </div>
      <blockquote
cite="mid:CAGYvK4fBzLRkejuScib5UDkMmM_yOvV2Ms5GShbu+U3Br=ssSw@mail.gmail.com"
        type="cite">
        <div dir="ltr"><a moz-do-not-send="true"
            href="http://dac.ca/index.html">http://dac.ca/index.html</a><br>
        </div>
        <div class="gmail_extra"><br>
          <div class="gmail_quote">On Wed, Apr 27, 2016 at 9:33 PM,
            Lynelle Hamilton <span dir="ltr"><<a
                moz-do-not-send="true" class="moz-txt-link-abbreviated"
                href="mailto:lynelle@lahamilton.com"><a class="moz-txt-link-abbreviated" href="mailto:lynelle@lahamilton.com">lynelle@lahamilton.com</a></a>></span>
            wrote:<br>
            <blockquote class="gmail_quote" style="margin:0 0 0
              .8ex;border-left:1px #ccc solid;padding-left:1ex">
              <div bgcolor="#FFFFFF" text="#000000"> Hello Listers<br>
                <br>
                I am on the third house and hope I can impose with a few
                questions to those who've much more experience than I.
                I've only built from scratch, so have no feel for the
                following.<br>
                <ol>
                  <li>Which is best: insulated slab on grade or an
                    insulated crawl space?  The conservation folks (and
                    I agree) will not allow a basement, due to the water
                    table. <br>
                  </li>
                </ol>
                <br>
              </div>
            </blockquote>
          </div>
        </div>
      </blockquote>
      <br>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
Greenbuilding mailing list
to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:Greenbuilding@bioenergylists.org">Greenbuilding@bioenergylists.org</a>

to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org</a></pre>
    </blockquote>
    <br>
  <br />
<table style="border-top: 1px solid #aaabb6;">
        <tr>
        <td style="width: 55px; padding-top: 13px;"><a href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank"><img src="https://ipmcdn.avast.com/images/2016/icons/icon-envelope-tick-round-orange-v1.png" /></a></td>
                <td style="width: 470px; padding-top: 15px; color: #41424e; font-size: 13px; font-family: Arial, Helvetica, sans-serif; line-height: 18px;">Virus-free. <a href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank" style="color: #4453ea;">www.avast.com</a>
                </td>
        </tr>
</table></body>
</html>