<!DOCTYPE html><html><head>
<style type="text/css">body { font-family:'Times New Roman'; font-size:13px}</style>
</head>
<body>On Fri, 25 Nov 2016 12:17:20 -0500, Reuben Deumling <9watts@gmail.com> wrote:<br><div><br></div><div>> restoring farmhouse ...roof .. 12-in-12 pitch, </div><div><br></div><div>> new rafters are 2x6 and I'm going to run 2x4s perpendicular to them</div><div><br></div><div>> What I haven't decided is whether to leave the ceiling vaulted or frame in a normal flat ceiling at 8 or 9 feet<br></div><blockquote style="margin: 0 0 0.80ex; border-left: #0000FF 2px solid; padding-left: 1ex">
</blockquote><br><div>Reuben;</div><div><br></div><div>It's unclear to me whether you're leaving the existing roof as-is and just adding a "cap" over the flat roof at the peak or installing new rafters from the top plate of the second storey walls.<br></div><div><br></div><div>If the latter, I'd be inclined to configure the new 2x lumber as 24" deep spaced rafters (aka site-built parallel chord trusses using 12" wide x 24" deep plywood gussets spaced at 1/3 or 1/5 points along the span of the rafter) rather than as the proposed 2x6 rafters with 2x4 purlins.</div><div><br></div><div>The 24 inch rafter depth would make for very strong, stiff rafters that would also allow for 18"-plus of insulation and a ventilation air space over the insulation .</div><div><br></div><div>As for vaulted vs flat ceiling : I'd put a collar tie across the rafters and utilise that collar tie as the top of ceiling with sloped ceiling below that point. </div><div>"Soaring" (or as one realtor's mis-print appropriated called it "sorrowing") vaulted ceilings that extend all the way to a pointy peak get old pretty quick. Pointy-peaked vaults may be well suited for structures intended for the Divine but for mortals, modest vaults truncated by ceilings at collar ties are IMO, more appropriate to the human scale.</div><div><br></div><div> ---- * ----</div><div><br></div><div>If the proposal is just to extend the slope of the existing roof by adding a "cap" over the flat roof at the peak of the existing roof, I think that I'd look at making the "cap" portion as a glass over-roof that would function as an enclosure for a solar batch heater (if feasible in that locale) or a small wintergarten or rooftop greenhouse or clothes dryer or [other]. </div><div><br></div><div>PS: This message was CC'd to Reuben just in case the Listserver software inexplicably removes the body of the message and sends out a null message again.</div><br><div id="M2Signature"><div>-- </div><div>=== * ===<br>Rob Tom T6015O<br>Kanata, Ontario, Canada<br><br>< A r c h i L o g i c at Y a h o o dot C a ><br><br>(manually winnow the chaff from my edress if you hit "Reply")</div></div></body></html>