<div dir="ltr"><div><div>Attention the overlaps of  Mr Hardware.<br><br>The top unit should overlap on top of the next unit down.<br><br>Otherwise if there is any condensation it will run into the insulation. <br><br></div>Regards<br><br></div>John Daglish<br><br></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature">John Daglish<br>Paris, France</div></div>
<br><div class="gmail_quote">2017-01-22 0:24 GMT+01:00 Frank Tettemer <span dir="ltr"><<a href="mailto:frank@livingsol.com" target="_blank">frank@livingsol.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hey Clarke, Here in Ontario there has been a cheap (but plastic!) product developped a decade back. It's a skimpy sheet of styro, like an egg carton thick, and factory-molded like an egg carton, to form a pair of ventilation throughways. These things get stapled to the underside of the roof, between rafters or joists, with the first one's "drip-line" outside in the soffit area. Each one staplled up is "shingled" in such a way that any mpisture above the styro, eventually drips out the un-insulated but Vented! soffit area.<br>
At the peak of the roof, VicWest makes a fantastic metal box-like vented roof ridge, that carries ventilation from the soffit through and out the ridge.<br>
Styro rafter vents are called Moore Vents in this area, cover about 22" x 32" area, cost about a buck each.<br>
Put up batts, or blown in cellulose, those plastic vents do it.<br>
<br>
( Aside: Twenty years ago, addressing this same concern for condensation, I made up a batch of "Moore Vents" out of scrap wood and card board.<br>
Laborious. But no problems with it over it's life so far.<br>
I pay the dollar for the store-bought ones now, gladly.)<br>
<br>
Here's a picture of the VicWest Vented Ridge, on page two, very bottom left corner:<br>
<a href="http://www.vicwest.com/sites/default/files/Res_SR_SnapRib_Ultravic_Install_Guide.pdf" rel="noreferrer" target="_blank">http://www.vicwest.com/sites/d<wbr>efault/files/Res_SR_SnapRib_Ul<wbr>travic_Install_Guide.pdf</a><br>
Here's a simple video of a guy putting the Rafter Vents up:<br>
<a href="https://www.youtube.com/watch?v=5DX25Vz2jDc" rel="noreferrer" target="_blank">https://www.youtube.com/watch?<wbr>v=5DX25Vz2jDc</a><br>
<br>
Frank Tettemer<br>
Living Sol ~ Building and Design<br>
<a href="http://www.livingsol.com" rel="noreferrer" target="_blank">www.livingsol.com</a><br>
<a href="tel:613%20585%203661" value="+16135853661" target="_blank">613 585 3661</a><span class=""><br>
<br>
<br>
On 21/01/2017 1:02 PM, Clarke Olsen wrote:<br>
</span><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">
I am building a 750 sqft building with two single plane (shed) roofs, using 12" I joists @ 3/12 pitch.<br>
Can we just stuff that 12" with Roxul, or is ventilation needed?<br>
Clarke Olsen<br>
</span><a href="http://clarkeolsendesign.com" rel="noreferrer" target="_blank">clarkeolsendesign.com</a> <<a href="http://clarkeolsendesign.com" rel="noreferrer" target="_blank">http://clarkeolsendesign.com</a>><span class=""><br>
373 route 203<br>
Spencertown, NY 12165<br>
USA<br>
<a href="tel:518-392-4640" value="+15183924640" target="_blank">518-392-4640</a><br>
<a href="mailto:colsen@taconic.net" target="_blank">colsen@taconic.net</a><br>
<br>
<br>
<br>
<br>
<br>
<br></span><span class="">
______________________________<wbr>_________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org" target="_blank">Greenbuilding@bioenergylists.o<wbr>rg</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" rel="noreferrer" target="_blank">http://lists.bioenergylists.or<wbr>g/mailman/listinfo/greenbuildi<wbr>ng_lists.bioenergylists.org</a><br>
<br>
<br></span>
No virus found in this message.<br>
Checked by AVG - <a href="http://www.avg.com" rel="noreferrer" target="_blank">www.avg.com</a> <<a href="http://www.avg.com/email-signature" rel="noreferrer" target="_blank">http://www.avg.com/email-sign<wbr>ature</a>><br>
Version: 2016.0.7998 / Virus Database: 4749/13807 - Release Date: 01/21/17<br>
<br><span class="HOEnZb"><font color="#888888">
</font></span></blockquote><span class="HOEnZb"><font color="#888888">
<br>
-- <br></font></span><div class="HOEnZb"><div class="h5">
<br>
<br>
______________________________<wbr>_________________<br>
Greenbuilding mailing list<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:Greenbuilding@bioenergylists.org" target="_blank">Greenbuilding@bioenergylists.o<wbr>rg</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org" rel="noreferrer" target="_blank">http://lists.bioenergylists.or<wbr>g/mailman/listinfo/greenbuildi<wbr>ng_lists.bioenergylists.org</a><br>
</div></div></blockquote></div><br></div>