[Stoves] Mobile pyrolysis plant

[Tom Miles]

The concepts on the websites are interesting.

 

What is the cost of the plant? FOB Factory?

 

What is the batch capacity (m3 or kg)? Batch cycle time? Production capacity
per day (m3 charcoal)?

 

How many people are employed in operating it?

 

Do you have emissions data for operating systems?

 

How many of these kilns are in operation?

 

Are any of these kilns use for making charcoal as a cooking fuel in
developing countries?

 

Thanks

 

Tom Miles 

 

 

From: stoves-bounces at lists.bioenergylists.org
[mailto:stoves-bounces at lists.bioenergylists.org] On Behalf Of
user-05 at list.ru
Sent: Thursday, December 22, 2011 1:47 PM
To: stoves at lists.bioenergylists.org
Subject: [Stoves] Mobile pyrolysis plant

 

Mobile pyrolysis plant
to produce charcoal, birch tar, tar, tire recycling.

 

Mobile pyrolysis plant is designed not only to produce charcoal, but also
for the production of birch tar from birch bark, automotive recycling tires
into liquid fuel. As we know the demand for charcoal depends on the season.
In the spring and summer of charcoal taken better in winter, worse. Birch
tar is always in demand, but in small quantities. His take veterinary
hospitals, pharmacies, some enterprises Chemical Industry. On tire recycling
products is a constant demand for steel cord, coke (with a mixture of soot).
For liquid heating oil needs a constant source of sales. In addition, the
tires are not always in large quantities.and for their storage needs more
space. Due to the versatility you can optimally allocate mode setting so
that it is not idle, and there was a constant sales.
In the production of charcoal in the mobile uglevyzhigatelnyh facilities for
people working in them, you have to manually unload the charcoal, wood dust
to breathe, which affects their health.
Mobile uglevyzhigatelnye installation with a few exceptions, much smoke,
emit dymogazy, which contains a number of not dogorevshih combustibles.
The most advanced facilities at the lower emission of harmful substances
into the atmosphere from stationary pyrolysis systems NRM Polikor, Ekolon.
The process of charcoal production is mechanized.
Of mobile pyrolysis plants can be noted uglevyzhigatelnyh pyrolysis furnace
uglevyzhigatelnuyu MUL2S, but it is necessary to exit the charcoal by hand.
You also need time to cool down the furnace.
Proposed for the production of pyrolysis for charcoal burning mobile unit
consists of several sections hoppers (retorts).Bunkers are closed tightly.
They are mounted on hinges and can be rotated in a vertical plane. So, if
you want to unload the charcoal ready, simply turn the tank and hold it in
front of the bunker-settler. Next, open the door in the side hopper and
charcoal thrown out himself in the bunker-settler. Then, the charcoal in a
bunker-sump cover asbotkanyu to spontaneous combustion of coal was not. Just
a few minutes and the hopper is ready for the next boot .. And load it as
follows: hand winch or two people turn the hopper (retort) in the vertical
plane to the horizontal position and lock in this position, putting on
scarves, a hopper tube. Next, you can start loading firewood or tires,
processed tires if for the production of liquid fuels. I note that the
processing of tires need additional equipment for the condensation of
combustible gases and liquid filtration otopliva.
In the mobile pyrolysis unit best burn combustible gases. Saving wood
combustion in the combustion chamber reaches up to 25%. In addition, in the
process of heating boilers and carbonation involves pyrolysis gases leaving
when shrinkage drevesiny.Na bins installed three-way valves. When an intense
parovydelenie, steam is expelled through a three-way valve.
The process of starting the boiler in the following: first, melted wood in
the firebox, and then the boiler works and heats the hopper combustion of
pyrolysis gases coming out one by one with each bin. For the afterburner
pyrogas provides secondary air supply to the nozzle located below the
combustion chamber ..
The design of the installation is designed so that you can get close to any
location and make repairs in places most high-temperature steel sheets are
replaced by chamotte plate. All heat-stressed place of the combustion
chamber are thermally insulated. Steel structures are not subject to
deformation.
Details of the construction of this facility is described in etogm site:

 <http://blogs.mail.ru/list/user-05/> http://blogs.mail.ru/list/user-05/ 

Regards, Yury Blagodarov. Russia


 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20111222/ccc7421e/attachment.html>