[Stoves] Pressure calculations

Frank Shields frank at compostlab.com
Mon Jun 20 12:21:02 CDT 2011


Stovers,

 

Hope I am doing this right by adding an attachment and that the file is not
too big and I get into trouble –like last time. 

 

Container C is filled with an anaerobic mess that releases gas under
pressure. Tubing (~ ¼” dia) coils up into container A.

Container B is filled with water and opening of container A goes in about an
inch. Over flow water from A goes into a catch basin under B. 

 

I can measure the volume of gas captured in A by a calibration on the side
of the clear container or the volume of water captured in the catch basin.
If the type of gas is important I can add NaOH to the water in A to
eliminate the CO2 leaving only methane. But prefer not to. I can add a
pressure/vacuum gauge to the top of A  if needed. The methane coming out of
C is produced with pressure but I think there is no pressure as the 1/4”
tubing is open going into A. Is there a back pressure from the water in A on
the gas coming out of C? Does the height of C relative to A (top or bottom)
have any bearings on the set up?

 

Thanks

Frank

 

 

Frank Shields

Control Laboratories, Inc.

42 Hangar Way

Watsonville, CA  95076

(831) 724-5422 tel

(831) 724-3188 fax

frank at compostlab.com

www.compostlab.com

 

 

  _____  

From: stoves-bounces at lists.bioenergylists.org
[mailto:stoves-bounces at lists.bioenergylists.org] On Behalf Of Steve Taylor
Sent: Monday, June 20, 2011 12:10 AM
To: Discussion of biomass cooking stoves
Subject: Re: [Stoves] Pressure calculations

 

 

On 20 June 2011 00:48, Frank Shields <frank at compostlab.com> wrote:

 

Stovers;

 

Producing methane to use in a burner I am having problems with some pressure
calculations and hope someone can help.

 


Frank, 
  A picture is worth a thousand words here. 

I think I see what you want, and Andrew is going the right way, but I'd like
to see a sketch ? 

Steve 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20110620/d689b23b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: methane-set-up.pdf
Type: application/pdf
Size: 21589 bytes
Desc: not available
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20110620/d689b23b/attachment.pdf>


More information about the Stoves mailing list