[Stoves] Powering a TLUD Fan
Frans Peeters
peetersfrans at telenet.be
Thu Aug 30 19:01:56 CDT 2012
Phil Crispin,
You can make 5V for a uP fan of 1 Watt
1 LiION +1 NiMH or 4x1 NiMH or 2xLiION +substracting 2,4 V by 1 zener2,4V
or4X1 Si diode like 1N4001 or others .
A TENSION STABILISER LM7805 NEEDS 8-32 V in for 5V OUT
.
Speed adjusting by 1 WW potentiometer of 10 ohm will do (or 20 ohm and no
substracton but use half the potmeter ..
SOME FANS ARE BRUSHLESS dc this can interfere with PWM ;
PWM TAKES ALSO MORE THEN 3V for itself
Power supply is 12V 5-10 w others AC230 V
3XLiION +100 OHM ww pot is cheaper then 4XLiION + PWM or LM317 variable
tension chip..
Corr; YES laptop packs of 4450 mAh 14,8 v DELL are 4x2 cels of 2225 mAh
Regards
Frans
Onderwerp: Re: [Stoves] Powering a TLUD Fan
Will it operate as a PWMR at the same time? Seems an obvious choice.
Frans, what do you think? Put together what batteries you can find and hook
it to an LM3224 and then a power supply fan.
Thanks
Crispin
More information about the Stoves
mailing list