[Stoves] wood stove and the TLUD stove
rajan_jiby at dataone.in
rajan_jiby at dataone.in
Mon Feb 6 22:25:01 CST 2012
Dear Paul,
>
> Message: 4
> Date: Sun, 05 Feb 2012 22:36:18 -0600
> From: "Paul S. Anderson" <psanders at ilstu.edu>
> To: rajan_jiby at dataone.in, Discussion of biomass cooking stoves
> <stoves at lists.bioenergylists.org>
> Subject: Re: [Stoves] Modified Wood Stove - send pictures please
> Message-ID:
> <20120205223618.111670q7mk40gq4o at redbirdmail.illinoisstate.edu>
> Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
> format="flowed"
>
> Rajan,
>
> I did not see any photos. Please place some on your website and let us
> know.
>
> Paul
> --
Hopefully, Servals may be posting a photo/video on the website soon.
Regards,
Rajan
> Quoting rajan_jiby at dataone.in:
>
>> Dear All,
>>
>> Please read the details of the latest modified natural draft wood
>> stove from servals ( with whom I am a technical consultant ) at
>> http://servalsgroup.blogspot.com/2012/01/servals-modified-natural-draft-wood.html
>> .
>>
>> Regards,
>>
>> Rajan
>>
> ------------------------------
Dear Crispin,
>
> Message: 5
> Date: Mon, 6 Feb 2012 01:21:43 -0500
> From: "Crispin Pemberton-Pigott" <crispinpigott at gmail.com>
> To: "'Discussion of biomass cooking stoves'"
> <stoves at lists.bioenergylists.org>
> Subject: Re: [Stoves] Modified Wood Stove
> Message-ID: <001b01cce497$a1bb40e0$e531c2a0$@gmail.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear Rajan
>
>
> This may seem like an odd question but I have a question regarding the
> test
> that was used to determine the CO/CO2 ratio. It lists a 1991 standard
> test.
>
>
> Do you know if the CO/CO2 ratio is measured as the mass-burned average, a
> time weighted average, or the minimum achieved, or.?
>
>
> Is there a website where the standard can be viewed?
>
>
> The result does not give the actual performance, it just says when the
> protocol was applied, it is less than 4% (0.04). I wondered if they gave
> you
> an actual number achieved of do you just get a pass/fail.
>
>
> Thanks
>
> Crispin
>
I think you are referring to the TLUD stove.
The test was done in a lab and I was not present during the test. I have
only seen the results.
More like a pass/fail.
Regards,
Rajan
>
> Dear All,
>
>
> Please read the details of the latest modified natural draft wood stove
> from
> servals ( with whom I am a technical consultant ) at
> http://servalsgroup.blogspot.com/2012/01/servals-modified-natural-draft-wood
> .html .
>
>
> Regards,
>
> Rajan
>
More information about the Stoves
mailing list