[Stoves] Calculating the RPM

pietverhaart at bigpond.com pietverhaart at bigpond.com
Wed Feb 13 01:13:20 CST 2013


Using a voltage regulator is not a good idea. The grid frequency is apparently 60Hz as in the US. A better solution is replacing the motor pulley with a cylindrical wooden pulley of the right diameter. The normal grooved pulley on the intermediate shaft will keep the belt in place.

Peter Verhaart
Powered by Telkomsel BlackBerry®

-----Original Message-----
From: "David G. LeVine" <dlevine at speakeasy.net>
Sender: "Stoves" <stoves-bounces at lists.bioenergylists.org>
Date: Wed, 13 Feb 2013 00:25:42 
To: Discussion of biomass cooking stoves<stoves at lists.bioenergylists.org>
Reply-To: Discussion of biomass cooking stoves
	<stoves at lists.bioenergylists.org>
Subject: Re: [Stoves] Calculating the RPM

_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
stoves at lists.bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org

for more Biomass Cooking Stoves,  News and Information see our web site:
http://www.bioenergylists.org/




More information about the Stoves mailing list