[Stoves] SEET Lab in Ulaanbaatar running again in its new home

[Crispin Pemberton-Pigott]

Dear Frank

 

Thanks. The burn room is a bit small (the stoves run up to 30 kW) but the
instrument room is large. We often have a lot of visitors so 20 people can
easily fit in the room to see the whiteboards.

 

The stoves all have chimneys so a gas sample is drawn from the chimney. The
temperature at the height at which the chimney exits the living space (the
'heated envelope') is recorded to calculate the thermal efficiency of the
system as a whole.

 

A hood can be used with small stoves (which are thought of as 'picnic
stoves'!)  connected to the chimney which is what is done at the SeTAR
Centre.

 

There are several humming motors and the compressor and CO2 adsorber is not
in the same room (noisy). You can see the diluter stuck into the lower end
of the chimney. This is fed dry air that reduces the copious moisture level
to something that will not condense. We don't want to measure 'fog' as
'particles'. The dilution is variable at the touch of a needle valve. The
dilution is monitored by tracking the level of CO2 in the stack and diluter
- a good suggestion made by Tami Bond some year ago. 

 

Last week we managed to measure smoke that reached 50 grams per cubic metre
of air (undiluted), far beyond our previous record of 17. Fifty million
micrograms is a heck of a snort for a lab to deal with. We are looking at
ways to reduce the amount of moisture and volatile vapours in the while
system. If we can get it out early, it makes everything last a heck of a lot
longer.

 

Regards

Crispin

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20130603/317edd68/attachment.html>