[Stoves] Meat grinder fuels for TLUDs was Re: wheat husk pellets

[Frank Shields]

Paul, 

 

I have a collection of meat grinders I got at garage sales I use to break up
char without a lot of dust and works on small amounts of woody chip samples.
If I can find some rice hulls I will let you know.  Perhaps tomorrow.

 

Frank

 

From: Stoves [mailto:stoves-bounces at lists.bioenergylists.org] On Behalf Of
Paul Olivier
Sent: Wednesday, June 12, 2013 4:33 PM
To: Discussion of biomass cooking stoves
Subject: Re: [Stoves] Meat grinder fuels for TLUDs was Re: wheat husk
pellets

 

Do you think it is possible to run loose rice hulls through a meat grinder
and obtain a uniform pellet?

Paul

 

On Thu, Jun 13, 2013 at 12:31 AM, Energies Naturals C.B.
<energiesnaturals at gmx.de> wrote:


These are time honoured devices:
http://www.elma.es/procesadores-alimentos/picadoras-carne-manuales/32
 we connected them via a long square tube and a universal joint or hardy
connection to the hub of any small car or a stationary engine. A water wheel
would do exellently !

Rolf



On Tue, 11 Jun 2013 21:21:08 +0100
ajheggie at gmail.com wrote:

> [Default] On Tue, 11 Jun 2013 12:44:47 -0500,Paul Anderson
> <psanders at ilstu.edu> wrote:
>
> >Dear all,
> >
> >Here is a link for largest of grinders from Cabelas.    US$680
> >
> >>
http://www.cabelas.com/product/Cabelas-Commercial-Grade-1-12-hp-Electric-Gri
nder/1646476.uts?Ntk=AllProducts
<http://www.cabelas.com/product/Cabelas-Commercial-Grade-1-12-hp-Electric-Gr
inder/1646476.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch%2F%3FN%3D%2
6No%3D0%26Ntk%3DAllProducts%26Ntt%3Dmeat%2Bgrinder%26Ntx%3Dmode%252Bmatchall
partial%26WTz_l%3DHeader%253BSearch-All%2BProducts%26WTz_st%3D%26WTz_stype%3
DSP%26form_state%3DsearchForm%26recordsPerPage%3D20%26search%3Dmeat%2Bgrinde
r%26searchTypeByFilter%3DAllProducts%26x%3D0%26y%3D0&Ntt=meat+grinder&WTz_l=
Header%3BSearch-All+Products>
&searchPath=%2Fcatalog%2Fsearch%2F%3FN%3D%26No%3D0%26Ntk%3DAllProducts%26Ntt
%3Dmeat%2Bgrinder%26Ntx%3Dmode%252Bmatchallpartial%26WTz_l%3DHeader%253BSear
ch-All%2BProducts%26WTz_st%3D%26WTz_stype%3DSP%26form_state%3DsearchForm%26r
ecordsPerPage%3D20%26search%3Dmeat%2Bgrinder%26searchTypeByFilter%3DAllProdu
cts%26x%3D0%26y%3D0&Ntt=meat+grinder&WTz_l=Header%3BSearch-All+Products
>
>
> Paul
>
> This is one I've used
>
> http://www.northerntool.com/shop/tools/product_200449763
>
> A bit cheaper to start with.
>
> These just need the slicer removing and the die plate replaced with a
> custom one.
>
> The compression is achieved by the screw of the auger tightening up to
> extrude the  material. I used warm waste glycerol and sawdust before I
> realised glycerol was not easy to burn cleanly.
>
> AJH
>
> _______________________________________________
> Stoves mailing list
>
> to Send a Message to the list, use the email address
> stoves at lists.bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
>
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists
.org
>
> for more Biomass Cooking Stoves,  News and Information see our web site:
> http://stoves.bioenergylists.org/
>



--
Energies Naturals C.B. <energiesnaturals at gmx.de>


_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
stoves at lists.bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists
.org

for more Biomass Cooking Stoves,  News and Information see our web site:
http://stoves.bioenergylists.org/




-- 
Paul A. Olivier PhD
26/5 Phu Dong Thien Vuong
Dalat
Vietnam

Louisiana telephone: 1-337-447-4124 (rings Vietnam)
Mobile: 090-694-1573 (in Vietnam)
Skype address: Xpolivier
http://www.esrla.com/ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20130612/4e644f25/attachment.html>