[Stoves] A doctoral thesis on stoves
Sarbagya R. Tuladhar
sarbagya007 at gmail.com
Fri Sep 20 03:16:54 CDT 2013
12-15 m high ???
Cheers
Sarbagya
On 20/09/2013, at 4:35 AM, Crispin Pemberton-Pigott wrote:
> Very good paper with some novel adaptions of the test methods, approaches to the community and the retrofitted device.
>
> The money photo is this one:
>
> <image003.jpg>
>
> The pot rests are far too tall and create several simultaneous problems for effective heat transfer. The addition of turbulators is one way to address some of this error.
>
> Given the reported power level the pot rests should be about 12-15m high and that would reduce the initial problem. It would be interesting to see a stove built with both changes.
>
> Regards
> Crispin
>
>
> +++++++++++
> List:
>
> 1, I recommend this recent new (free) technical stove paper:
>
> http://www.energsustainsoc.com/content/pdf/2192-0567-3-16.pdf
> _______________________________________________
> Stoves mailing list
>
> to Send a Message to the list, use the email address
> stoves at lists.bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>
> for more Biomass Cooking Stoves, News and Information see our web site:
> http://stoves.bioenergylists.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20130920/5861ed77/attachment.html>
More information about the Stoves
mailing list