[Stoves] Clinker Formation

[Shailendra Garg]

Dear All,

We in India are trying to find a solution to the clinker problem in the
stoves as the temperature reaches above 1000 degrees very soon in a 30KW
stove for example. Now the pellets we are using are mainly bagasse based,
and its ash melting point is above 1000 degrees but still it is not giving
the right result. The pellets are not made of 100% bagasse and the size we
are using is 8mm.

Please give your inputs/suggestions if this problem can be solved by
adjusting the primary secondary air or we need to change the composition of
the pellets.

Regards
Shailendra
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20140516/36444876/attachment.html>