[Stoves] Punch for duffers

[Bruce Southerland]

Check out Amazon for a similar tool with better punches for 1/3 of the price.

From: Stoves [mailto:stoves-bounces at lists.bioenergylists.org] On Behalf Of Crispin Pemberton-Pigott
Sent: Monday, November 10, 2014 8:56 AM
To: 'Discussion of biomass cooking stoves'
Subject: [Stoves] Punch for duffers

Dear Friends

If you are making sheet metal holes in experimental stoves and are looking for a way to make small neat holes for screws, this is a possible technology for you:

https://www.beaducation.com/zen_products/435-screw-down-hole-punch-1-6mm-2-3mm-holes<http://cp.mcafee.com/d/FZsS83gwrhohvsjuvhsdTdETsopKYMUCrhKUMPtVZwsrhKUMPtVxNASztNxCVEVjKedAalrCj-9-Mg1iKMIj-A_zoD6l9OS7bCRtxoDZ9_6NecGjBIendI-VqXz3_nVBeZT7-LsKCOYqeuvp7fCzBfBHEShjlhhvVkffGhBrwqrhdECXYyUqenAkmkXL6XCOsVHkiP2D4fR1KSPBm7bUav0lmzl1KQWoMO-nFqfC2W5j42VeF_BRCUm9BQiXyGFtcKOGGn9Rf-xKAWCvEn8lrxrW0E-l9QUxaLM-94IvaAWs01dLnu76PiScjGp-xFtd40mrxoCq87qNd423rHLNErjsdEoRP>

$26.00

In principle you could make one of any size.

Regards
Crispin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20141110/c12b8ae1/attachment.html>